F-1R Cog Project
Thread Starter
TECH Fanatic
iTrader: (13)
Joined: Sep 2006
Posts: 1,434
Likes: 3
From: Houston TX/Worldwide
F-1R Cog Project Well all the parts came into SNL and they should be putting her togethere shortly however I have to make a few changes.
I need to get better heads as the ones I have are Patrioit Performance stage 3's and will not flow the numbers I need for the F-1R 408 Combo.
Can someone let me what would flow the numbers?
F-1R Pics. and its compared to my old S91MM Turbo.
I need to get better heads as the ones I have are Patrioit Performance stage 3's and will not flow the numbers I need for the F-1R 408 Combo.
Can someone let me what would flow the numbers?
F-1R Pics. and its compared to my old S91MM Turbo.
Thread Starter
TECH Fanatic
iTrader: (13)
Joined: Sep 2006
Posts: 1,434
Likes: 3
From: Houston TX/Worldwide
Custom fab build time and cost. I have been waiting on my car forever. This is a complete bolt on kit. No fab work needed other then the intercooler piping.
Trending Topics
Thread Starter
TECH Fanatic
iTrader: (13)
Joined: Sep 2006
Posts: 1,434
Likes: 3
From: Houston TX/Worldwide
There is no way it the same. A custom fabed turbo kit vs a bolt on sc kit. there crazy,
Anyone have any idea's on heads? I leaning towards the Dart Pro 1 250's
Anyone have any idea's on heads? I leaning towards the Dart Pro 1 250's
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
Thread Starter
TECH Fanatic
iTrader: (13)
Joined: Sep 2006
Posts: 1,434
Likes: 3
From: Houston TX/Worldwide
Not with a auto car. I already did a complete Th400 swap.
All Pro's are really high. I am looking into ETP's
Also Bob the Cog Bracket pulls it forward and up. So hitting the wheel well is not a issue. A cowl is a must.
All Pro's are really high. I am looking into ETP's
Also Bob the Cog Bracket pulls it forward and up. So hitting the wheel well is not a issue. A cowl is a must.
Thread Starter
TECH Fanatic
iTrader: (13)
Joined: Sep 2006
Posts: 1,434
Likes: 3
From: Houston TX/Worldwide
Made a few changes. Got rid of the LQ9 Heads I had due to them not flowing enough and went to a set of AFR 225's.
Also had some engine bay work done. Went with a flat satin black.
efore. Big hole uhhhhhhhhhhhh dont ask.
Cleaned up ready for paint.
Completed.
Also had some engine bay work done. Went with a flat satin black.
efore. Big hole uhhhhhhhhhhhh dont ask.
Cleaned up ready for paint.
Completed.
Thread Starter
TECH Fanatic
iTrader: (13)
Joined: Sep 2006
Posts: 1,434
Likes: 3
From: Houston TX/Worldwide
I was leaning towards them also. I picked up the AFR's for $1500.00 so I could not beat it. I would also look at the PRC's. Look at how there flow benched vs the others.
Thread Starter
TECH Fanatic
iTrader: (13)
Joined: Sep 2006
Posts: 1,434
Likes: 3
From: Houston TX/Worldwide
Well got my custom manual setup with built inline lock. this setup looks sick 
If you are interested yes I do have a source and they are a hell of alot cheaper then the other one on the market for our car Enjoy.
If you are interested yes I do have a source and they are a hell of alot cheaper then the other one on the market for our car Enjoy.
Last edited by 1INSANEGTO; Nov 4, 2009 at 03:08 PM.