Highest Horse Power Numbers using a ProChargers D1SC
#1
11 Second Club
Thread Starter
iTrader: (12)
Join Date: Nov 2005
Location: Fort Wayne, Indiana
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
Highest Horse Power Numbers using a ProChargers D1SC
Hey guys as the title says Im just wondering what the highest horsepower numbers people have seen while using the D1SC head unit. Some friends and I just got back from a trip and we had great results with the current set up and was wondering what levels others were at with the same system or head unit from ProChargers.
Give some details of the combo and the highest horse and tq numbers while still using the D1SC head unit please.
One combo the tuning shop had seen before was a
C5, 408, l92 heads, Beck intake, and D1SC maxed out making 780rwhp using a dyno jet.
Lets here your best results Thanks
Give some details of the combo and the highest horse and tq numbers while still using the D1SC head unit please.
One combo the tuning shop had seen before was a
C5, 408, l92 heads, Beck intake, and D1SC maxed out making 780rwhp using a dyno jet.
Lets here your best results Thanks
#3
10 Second Club
iTrader: (24)
I think mine is up there. 808.65 RWHP and 729.95 RWTQ, that was before I was overspinning the blower, no new numbers yet. Blower was at 59,000RPM then. This was with a 4L60E, triple disk Vig. converter, steel DS, 12bolt with true track, 33 splines, and 17x12 Fikses.
Setup consists of:
9.62:1 396ci
AFR 205's
Custom XP Racing blower cam
1 7/8" Kooks LT's, custom 3" ORY
Built 4L60E (other drive train stuff metioned above)
18psi out of the blower (it makes 19.5 now, again, no numbers)
Setup consists of:
9.62:1 396ci
AFR 205's
Custom XP Racing blower cam
1 7/8" Kooks LT's, custom 3" ORY
Built 4L60E (other drive train stuff metioned above)
18psi out of the blower (it makes 19.5 now, again, no numbers)
#6
TECH Fanatic
iTrader: (33)
my old number are in my sig... the cam i used if for sale custom grind by lme/cam motion
$300 shipped... my setup was no where near maxed out... everyone said the cam was too big but idles great and so was the power. if i dig into old threads i can probably find the spec sheet. but im sure lme has it on file too.
$300 shipped... my setup was no where near maxed out... everyone said the cam was too big but idles great and so was the power. if i dig into old threads i can probably find the spec sheet. but im sure lme has it on file too.