98 Camaro 370CI T76 Build up
02-04-2010, 02:17 AM
#33
TECH Regular
Thread Starter
iTrader: (18)
Join Date: Jul 2008
Posts: 492
Likes: 0
Received 0 Likes
on
0 Posts
Finally just took a day off to work on some things for the Camaro.
Few things include- making a shifter plate to cover the M6 hole to adapt the B&M Quicksilver shifter
Why an auto shifter ? Isn't my car an M6 ? not anymore !!
ProTorque Converter
Coan FMVB TH400
painted my intake manifold and fuel rails ( I hated the fading anodizing and dirty throttle body)
Since I went TH400. The T76 Q-trim would not Suffice.. Came across an EXCELLENT deal on an ST80
Extra Spearco Intercooler core ? hell yeah
B-Fab fun ... blank canvas into art
yea ... it fits
on a side note.. something pretty complicated built by B-fab for Redzones Time attack road race S2000
all Fuel components in the car have to be fully covered
Finally had time to finish the end-tanks and made brackets to mount the trans cooler to the catch can
Broke out the wire covering kit and shrink wrap/ self fuse tape and went to town !
fiberglass covered my power wires because they run across/ above my turbo headers
makeshift bracket to mount my fuel regulator and blox racing vaccume box
Few things include- making a shifter plate to cover the M6 hole to adapt the B&M Quicksilver shifter
Why an auto shifter ? Isn't my car an M6 ? not anymore !!
ProTorque Converter
Coan FMVB TH400
painted my intake manifold and fuel rails ( I hated the fading anodizing and dirty throttle body)
Since I went TH400. The T76 Q-trim would not Suffice.. Came across an EXCELLENT deal on an ST80
Extra Spearco Intercooler core ? hell yeah
B-Fab fun ... blank canvas into art
yea ... it fits
on a side note.. something pretty complicated built by B-fab for Redzones Time attack road race S2000
all Fuel components in the car have to be fully covered
Finally had time to finish the end-tanks and made brackets to mount the trans cooler to the catch can
Broke out the wire covering kit and shrink wrap/ self fuse tape and went to town !
fiberglass covered my power wires because they run across/ above my turbo headers
makeshift bracket to mount my fuel regulator and blox racing vaccume box
02-08-2010, 11:26 AM
#34
TECH Regular
Thread Starter
iTrader: (18)
Join Date: Jul 2008
Posts: 492
Likes: 0
Received 0 Likes
on
0 Posts
re-loomed/ pulled back wires in the wiring harness/ shrink wrapped and taped.
prepped the engine bay and sprayed it body color + clear
hopefully this week ill update with the motor IN the car.
prepped the engine bay and sprayed it body color + clear
hopefully this week ill update with the motor IN the car.
