G-body FI setups

Reply Subscribe

Thread Tools

Search this Thread

Dec 26, 2009 | 04:18 PM

Monte LS....1

Thread Starter

On The Tree

iTrader: (3)

Joined: Aug 2009

Posts: 159

Likes: 0

From: Tennessee

G-body FI setups

Any guys with FI g-body swaps have any pics of their builds. Like to get some ideas. Thanks

Dec 26, 2009 | 08:56 PM

robbyredneck

TECH Regular

iTrader: (1)

Joined: Apr 2009

Posts: 403

Likes: 1

From: canandaigua,n.y.

85 regal, lq4, mp76 ,4l80e .should have some pics soon. just got fmic and radiator mounted up. motors in. had to cut a/c lump out of heater box though.

Dec 26, 2009 | 11:49 PM

DeltaT

TECH Addict

iTrader: (5)

Joined: Jun 2005

Posts: 2,404

Likes: 1

Not an LSx but lots of pictures of my 81 Malibu FI/4L80E/big brakes/suspension/other setup:

http://home.mindspring.com/~jim_fisk/id1.html

If you click on the tiny square to the right of the bottom picture, it will take you to my new 434/Whipple build site.

Jim

Dec 27, 2009 | 08:49 AM

gEtyOPaPiOn

Launching!

iTrader: (11)

Joined: Jun 2003

Posts: 285

Likes: 0

From: Home of the sideshows!

that mali still running hard!

Dec 27, 2009 | 05:12 PM

Monte LS....1

Thread Starter

On The Tree

iTrader: (3)

Joined: Aug 2009

Posts: 159

Likes: 0

From: Tennessee

Quote:

Originally Posted by DeltaT

Clean I like it. Aughtta be plenty of room in the front nose of my car for a front mount and all the plumbing...pretty sure a TT build could be done in there

Dec 27, 2009 | 05:55 PM

EPP

FormerVendor

iTrader: (22)

Joined: Mar 2003

Posts: 13,063

Likes: 2

Quote:

Originally Posted by Monte LS....1

Any guys with FI g-body swaps have any pics of their builds. Like to get some ideas. Thanks

http://www.exoticperformanceplus.com...html?item=1794

Check out this link. Bob

Dec 27, 2009 | 10:16 PM

Monte LS....1

Thread Starter

On The Tree

iTrader: (3)

Joined: Aug 2009

Posts: 159

Likes: 0

From: Tennessee

Quote:

Originally Posted by Exotic Performance Plus

http://www.exoticperformanceplus.com...html?item=1794

Check out this link. Bob

Thanks, Bob. I think that is or at least alot like the kit thats on my buddy Jason's (jashell1562) nova. Impressed with the quality of the setup and the numbers on the dyno. Was wondering though how everyone routed the plumbing. Lots of room under the hood and in the nose area. I'd say a TT setup with an inlet on each end of the intercooler and the outlet in the middle top going over and through the top of the radiator support would look good. Little to much plumbing for me right now though.

Bob, while I've got your attention, have you had any edelbrock pro flo xt intakes in your shop or know of any setups with that intake? They do ok as a NA and FI intake? If they perform as claimed to, I'd definitely be in for one.