IAT sensor placement

Reply Subscribe

Thread Tools

Search this Thread

01-18-2010 | 10:19 PM

XtremeDime

Thread Starter

TECH Addict

iTrader: (16)

Joined: Jul 2005

Posts: 2,899

Likes: 0

From: Anchorage, ALASKA

IAT sensor placement

Im guessing its after BOV but before TB? Also is it ok to mount on the side of the pipe as opposed to the top? Thanks.

Reply Like

01-18-2010 | 11:46 PM

WS6 GreeN

TECH Enthusiast

Joined: Jan 2003

Posts: 582

Likes: 0

From: Birmingham, AL

Mine's mounted on the side of the pipe a little in front of the BOV which is right in front of the intake

It seems to be very accurate from the scanning I've done so far.

Reply Like

01-18-2010 | 11:54 PM

bad6as

11 Second Club

iTrader: (17)

Joined: Mar 2005

Posts: 4,796

Likes: 0

From: Maryland

you using a fbody one i assume? the one from a typhoon or cyclone has npt threads and the same plug. you wont blow it out. but most people dont blow them out any ways. but side should be fine. i would go close to the tb

Reply Like

01-19-2010 | 08:10 AM

Kx69

On The Tree

iTrader: (2)

Joined: Sep 2007

Posts: 100

Likes: 0

From: East Eden NY

what if it was in the intake or elbow?

Reply Like

01-19-2010 | 01:05 PM

eviltwin_1987

TECH Fanatic

iTrader: (18)

Joined: Sep 2006

Posts: 1,002

Likes: 0

From: Nor Cal

The most accurate would be on the manifold. That's where I have mine

Reply Like

01-19-2010 | 05:11 PM

MUSTANGBRKR02

12 Second Club

iTrader: (91)

Joined: Aug 2006

Posts: 4,599

Likes: 5

From: Maine

I have mine just befor the bending coupler going into the intake. I'll send you pics if you pm me your email or phone number.

Mine pulls hard on 5lbs. And this torquer v2 seems to like boost just fine.

Reply Like

01-20-2010 | 08:01 PM

lazylongboarder

TECH Apprentice

iTrader: (2)

Joined: Aug 2006

Posts: 397

Likes: 0

Quote:

Originally Posted by eviltwin_1987

The most accurate would be on the manifold. That's where I have mine

Pics or description of location on intake please...up by where egr is normally mounted or back by Map? Thinking about it, it'd be easy to epoxy it in the egr spot...right?

Reply Like

Reply Subscribe