Advise?
Advise? Looks like my dad had $5k for me in a checking account I didnt know about. If all goes well & I can have the $. I think id like to get a used procharger kit. I cant get the supercharger idea out of my head since i picked up a powerdyne kit a few weeks ago, & sold after reading the bad reviews on it. Say I go with the procharger kit. What other supporting mods will I need & what kinda of hp gains and track times could i see? I have a 00 trans am, 6 spd, 80k miles, slp cat back, hallowed out cats with a k&n air system. near bone stock.
Not to sound like a dick but this has been asked 100's maybe even 1000's of times. That being said. This thread is the "REAL" deal when that question arises...https://ls1tech.com/forums/forced-in...induction.html
Goodluck!
Goodluck!
"TC76 Turbo Setup:
-6.0L Manifolds
-Mild Steel 2.5” Charge Pipes with a T4 Flange and Integrated Waste Gate mount and narrow band O2 bungs
-Mild Steel 3” Down Pipe with a Wide band O2 bung run over the k-member
-Turbonetics TC76mm Turbo
-TurboSmart 38mm Waste Gate
-TurboSmart Blow Off Valve
-Front Mount Intercooler 31”x12”x4”
-Stainless steel 3” Intercooler Pipes with Integrated BOV mount
-4 Ply Silicone Couplings
-T-Bolt Clamps
$3700 + Shipping"
and
"Stage 2 Street kit-700-800hp (600-700rwhp)
Walbro 340 intank fuel pump
Walbro fuel pump install kit
Nasty Performance hotwire kit
Nasty Performance Billet fuel rails
MagnaFuel billet fuel pressure regulator w/boost ref.
MagnaFuel billet stainless steel fuel filter
Aeroquip -6 braided stainless feed fuel line
Aeroquip fittings and misc parts to complete install
Mototron 60# injectors
Nasty Performance Stage 2 Street kit $1299.99
"
right at your 5k mark, and should be everything you need minus a tune
Also, those are from our sponsor, kentucky turbo and performance, kentuckyturboandperformance.com
-6.0L Manifolds
-Mild Steel 2.5” Charge Pipes with a T4 Flange and Integrated Waste Gate mount and narrow band O2 bungs
-Mild Steel 3” Down Pipe with a Wide band O2 bung run over the k-member
-Turbonetics TC76mm Turbo
-TurboSmart 38mm Waste Gate
-TurboSmart Blow Off Valve
-Front Mount Intercooler 31”x12”x4”
-Stainless steel 3” Intercooler Pipes with Integrated BOV mount
-4 Ply Silicone Couplings
-T-Bolt Clamps
$3700 + Shipping"
and
"Stage 2 Street kit-700-800hp (600-700rwhp)
Walbro 340 intank fuel pump
Walbro fuel pump install kit
Nasty Performance hotwire kit
Nasty Performance Billet fuel rails
MagnaFuel billet fuel pressure regulator w/boost ref.
MagnaFuel billet stainless steel fuel filter
Aeroquip -6 braided stainless feed fuel line
Aeroquip fittings and misc parts to complete install
Mototron 60# injectors
Nasty Performance Stage 2 Street kit $1299.99
"
right at your 5k mark, and should be everything you need minus a tune
Also, those are from our sponsor, kentucky turbo and performance, kentuckyturboandperformance.com
I think I'm going to stick with engine work for now, heads/cam. Just ordered QPT long tubes, weiand intake & 80 mm TB. Doing all the supporting mods for a cam and going from there. Thanks for the advise.
Trending Topics
your going to be better off sending that weiand back and buying a fast 90/90 setup. How old are you? Not college age by chance are ya? If so, I would recommend saving some money for college, trust me.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
