V-Band Assemblies, where do you buy them?
#1
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Jul 2007
Location: Davenport, IA
Posts: 1,351
Likes: 0
Received 0 Likes
on
0 Posts
V-Band Assemblies, where do you buy them?
Just curious as where has decent prices on v-band assemblies. I'm doing stainless tubing for the hot side and so i'm needing to pick up 2-3 v-band assemeblies to build this.
Any suggestions on somewhere to buy good priced assemblies?
PM me if nessesary,
Thanks!
Any suggestions on somewhere to buy good priced assemblies?
PM me if nessesary,
Thanks!
#4
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Jul 2007
Location: Davenport, IA
Posts: 1,351
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I was also looking at mandrelbends dot com and they seemed to be decent prices but i only see the 2.5" flanges and no 2.5" clamps. I was looking at ordering my mandrel bends from them but open to cheaper places...
Trending Topics
#12
Do a search on ebay for WYNTOMN... His stainless steel v-bands are dirt cheap and they ship really quick.
#13
TECH Addict
Join Date: Feb 2002
Location: Lewisville, Texas
Posts: 2,319
Likes: 0
Received 0 Likes
on
0 Posts
#15
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Jul 2007
Location: Davenport, IA
Posts: 1,351
Likes: 0
Received 0 Likes
on
0 Posts
ok so i got a question on this. I'm using stock 98-99 f-body manifolds and using 409 stainless piping off that then to a v-band and after the v-band will be mild steel. So i was thinkin can i use a stainless flange on the manifold side of the clamp and a mild steel flange on the other end of the clamp? I'm doing this on a budget so yes i'm cutting corners while i can. I dont see why it wouldnt work but just curious on people opinions if it would or not.
#16
#17
On The Tree
iTrader: (6)
ok so i got a question on this. I'm using stock 98-99 f-body manifolds and using 409 stainless piping off that then to a v-band and after the v-band will be mild steel. So i was thinkin can i use a stainless flange on the manifold side of the clamp and a mild steel flange on the other end of the clamp? I'm doing this on a budget so yes i'm cutting corners while i can. I dont see why it wouldnt work but just curious on people opinions if it would or not.
It is nice to have everything modular even if it costs a bit more. If you need to remove something later it makes it alot easier.
#18
11 Second Truck Club
iTrader: (34)
Join Date: Mar 2006
Location: Dallas, Georgia
Posts: 2,858
Likes: 0
Received 0 Likes
on
0 Posts
Website says they are sold out of 3" so I called.
Spoke w/ Rob...he checked and they had just received a pallet in.
He had 10 minutes til UPS arrived so he took my order over the phone and they'll be here Tuesday.