Modular Turbo TWIN TURBO KIT!
05-25-2010, 05:13 PM
#141
Seems like a bit of a pissing match and Rob's easy to deal with, why not just ask him when you're ordering the kit instead of bitching online, eh?
I'm excited for some pics. No offense homies.
I'm excited for some pics. No offense homies.
05-25-2010, 07:04 PM
#142
I was simply providing feedback to Modular Turbo; they responded… so it’s done. I hope their kit turns out good. However, if the reservoir isn’t where I want it, I’ll either move it or get one made… I haven’t yet given up amenities due to modifications… I’m not going to start now.
This isn’t an around-and-around the block in Maitland, FL type of car. I do long trips all over the UK and into mainland Europe… so, yes… I am THAT worried about having a spare with me.
Correct, I will build a motor, tranny, rear, fuel system, etc, to support a twin turbo setup, but I am unwilling to lose the spare or T-Top area… it’s my car… I decide what’s important.
My opinion is my opinion, I’m entitled to it; don’t feel the need to correct it. If you disagree, do it quietly.
Have a good day.
This isn’t an around-and-around the block in Maitland, FL type of car. I do long trips all over the UK and into mainland Europe… so, yes… I am THAT worried about having a spare with me.
Correct, I will build a motor, tranny, rear, fuel system, etc, to support a twin turbo setup, but I am unwilling to lose the spare or T-Top area… it’s my car… I decide what’s important.
My opinion is my opinion, I’m entitled to it; don’t feel the need to correct it. If you disagree, do it quietly.
Have a good day.
05-26-2010, 12:06 AM
#143
BigBlueTurtle: When you order your kit we will set it up so you can easily mount it somewhere else. I provide you with extra length lines and an assortment of brackets so that you can put it where you want it. I hope that fixes it. If not call me and we will work something out.
i want it to ratchet strap around the t-top bar lol
05-26-2010, 06:08 AM
#144
Staging Lane
Join Date: Jan 2006
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
BigBlueTurtle: When you order your kit we will set it up so you can easily mount it somewhere else. I provide you with extra length lines and an assortment of brackets so that you can put it where you want it. I hope that fixes it. If not call me and we will work something out.
05-27-2010, 12:17 PM
#150
TECH Enthusiast
Join Date: Nov 2009
Location: Brownsville, texas
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
06-06-2010, 10:51 PM
#152
TECH Fanatic
iTrader: (2)
Join Date: Apr 2008
Location: Born/Raised North East, MD Lived in VA, NC, MI Back in Yorktown, Va
Posts: 1,169
Likes: 0
Received 1 Like
on
1 Post
HAHAHAHAH If you knew half the **** this man had to go through you would understand that his main concern is not getting pics to someone who shows no interest in buying the kit.
Not only does he have a business to worry about making sure he stays positive, he has several other forums to sell parts and what not on, has to deal with ******** like you who just want to collect pictures and not spend the money for quality parts, he has a full time job/career to worry about. plus a wife and 2 kids. one which is only a few months old. a small handful cars of his own to test these parts on. and some way he is supposed to fit a small thing called a life into all this.
Morale of this story if you have nothing productive or nice to say about Rob, ModularTurbo, His associates, customers, affiliates, or soon to be customers you sir can
Sorry for being
but this is bullshit! 
06-07-2010, 11:41 AM
#154
06-07-2010, 04:23 PM
#155
This kit from Rob will go on to an f-body with very minimal fabrication. It is designed to just bolt right in.
06-07-2010, 04:58 PM
#157
Hey guys, the kit is there and have seen pics of the original mock up a while back. When I leave Alaska, I am going for a twin kit for sure. This thing does exist and will make some unreal power for sure. I have known Rob for a while now guys and this thing will be impressive in my opinion. Well atleast it better be so I can topple Rob's (Modular Turbo) Mustang lol. The only downfall for me is I am going to have to sell my ARH longtubes/ory and BMR kmember.
06-11-2010, 12:32 AM
#158
TECH Enthusiast
Join Date: Nov 2009
Location: Brownsville, texas
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, the kit is there and have seen pics of the original mock up a while back. When I leave Alaska, I am going for a twin kit for sure. This thing does exist and will make some unreal power for sure. I have known Rob for a while now guys and this thing will be impressive in my opinion. Well atleast it better be so I can topple Rob's (Modular Turbo) Mustang lol. The only downfall for me is I am going to have to sell my ARH longtubes/ory and BMR kmember.
ive been waiting for this kit
and atleast some pics...
please... (new pictures i mean)
06-11-2010, 01:09 AM
#159
Finished K member pics coming in a few days I promise...........
"It ain't no kick stand!!!!"
Mike: I got one waiting for ya and thanks for believing in us!
Hutch: calm down bro they are just curious man don't trip so hard, I do appreciate the loyalty though.
Reamo: thanks for the back up
87silverbullet: you are gonna **** ur pants when you see what Chris B is cooking up next!!!!!!!
"It ain't no kick stand!!!!"
Mike: I got one waiting for ya and thanks for believing in us!
Hutch: calm down bro they are just curious man don't trip so hard, I do appreciate the loyalty though.
Reamo: thanks for the back up
87silverbullet: you are gonna **** ur pants when you see what Chris B is cooking up next!!!!!!!
06-11-2010, 11:59 PM
#160
Launching!
iTrader: (1)
Join Date: Mar 2008
Location: All Over
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Kit is not out for us to buy just yet so no one has a kit. Just to give you an idea, ls2formula on here has a twin 78mm turbo kit on a 422 lsx and the car has all amenities and has ran 7.95 in the 1/4.
This kit from Rob will go on to an f-body with very minimal fabrication. It is designed to just bolt right in.
This kit from Rob will go on to an f-body with very minimal fabrication. It is designed to just bolt right in.
Where were these guys about a year and a half ago, 87bullet???? I bet one doesn't have to get rid of the stock cooling fans either, right?