[/QUOTE]
Procharger Hat Problem Fixed
I just finished building one to try. It is narrower to work with my application. I took a food strainer cut off the handle, and mounted it it a large coffee can base. Added a 3.5 inch aluminum neck and silicone coupler. Filter material is formed from UNI 5/8" filter foam.
http://i17.photobucket.com/albums/b65/Badge01/001-2.jpg
http://i17.photobucket.com/albums/b65/Badge01/001-2.jpg
Alright I am gonna go ahead and recommend that no one else buys this elbow and tries to use it. Or anyone that has one already changes it.
I installed mine about 3 weeks ago when I changed some charge pipe stuff. up until tonight it had only seen some street use and no real high rpm pulls.
So I went to the track tonight and on my 4th pass I noticed I has lost 5mph in the 1/8 (I was making licensing passes so no full passes yet) My buddies commented then about the blower sounding funny during my burn out. Checked the car over and found that it appears that I was sucking the elbow closed and into the blower
I need to pull the blower and inter cooler off tomorrow night and see how bad the damage it. I know it did bend the fins on the impeller and I am sure that part of this elbow is in the one end of the inter cooler
I installed mine about 3 weeks ago when I changed some charge pipe stuff. up until tonight it had only seen some street use and no real high rpm pulls.
So I went to the track tonight and on my 4th pass I noticed I has lost 5mph in the 1/8 (I was making licensing passes so no full passes yet) My buddies commented then about the blower sounding funny during my burn out. Checked the car over and found that it appears that I was sucking the elbow closed and into the blower
I need to pull the blower and inter cooler off tomorrow night and see how bad the damage it. I know it did bend the fins on the impeller and I am sure that part of this elbow is in the one end of the inter cooler
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
ddaaaaayyyuuummmm! This info needs to be on the first page in the very first post before someone else does that to their setup! Sorry to see that dude, that sux bad! 
http://shop.brutespeed.com/ATI-AIGI3...AIGI3I-015.htm The ProCharger Truck Inlet Hat still seems to be one of the better ways to go. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
I agree, it should be put on the first page. What a shame that it sucked itself in like that!
http://shop.brutespeed.com/ATI-AIGI3...AIGI3I-015.htm The ProCharger Truck Inlet Hat still seems to be one of the better ways to go. Bob
http://shop.brutespeed.com/ATI-AIGI3...AIGI3I-015.htm The ProCharger Truck Inlet Hat still seems to be one of the better ways to go. Bob
I wouldn't worry about it man, you aren't pulling enough air to make a difference with the base procharger hat on the setup you're running.
