**RCC Twin Turbo Build Update**
07-26-2010, 06:55 PM
#25
On The Tree
Join Date: Jan 2009
Location: Willis Texas
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Some updated pics.
Some of the fab work to the rear bumper for the chute mount, I should have taken a photo from below, the mount is wishboned into the rear frame. Also some of the other fab work to support the turbos.
A few more pics with the turbos located on the car. The turbos are not clocked to their permanent position.
Some of the fab work to the rear bumper for the chute mount, I should have taken a photo from below, the mount is wishboned into the rear frame. Also some of the other fab work to support the turbos.
A few more pics with the turbos located on the car. The turbos are not clocked to their permanent position.
07-26-2010, 08:12 PM
#28
On The Tree
Join Date: Jan 2009
Location: Willis Texas
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
08-03-2010, 03:23 PM
#33
RCC, It looks great so far!! Very impressive build!! The oval pipe was a great idea to make room for the charge pipe in the tunnel...... Just curious to know how you're going to route the charge pipe(s) in the front half of the car.... I know, i know, i'm getting ahead of your pics.... he he
08-04-2010, 08:18 PM
#34
On The Tree
Join Date: Jan 2009
Location: Willis Texas
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Exhaust is coming together. Heres the x pipe being fabbed.
Here it is on the car. There is a set of bullet mufflers mounted near the frame and another set will ne welded on at the exhaust tips.
Here it is on the car. There is a set of bullet mufflers mounted near the frame and another set will ne welded on at the exhaust tips.
