Good converter companies for turbo cars
#1
Good converter companies for turbo cars
Let me know what you guys are using and I dont care if its the best of the best of the small shop down the road as long as you have got good results out of it. Thanks
#7
There are a lot of good companies out there. But like said above, ATI, Neal Chance, also I have a midwest racing converter, then to throw in a sponsors name, circle D. Take your pick lol.
Trending Topics
#11
http://www.edgeracingconverters.com/ talk to andre...tell him van sent u.. u will not be disappointed..
#14
Hands down the Circle D Billets stuff is the way to go. Give Chriss a call. You will not find better customer service and willingness to work with you. His Billet stuff are designed in sutch a manor that you can switch from a 258mm convertor to a 245mm convertor. If he has to re-stall the convertor he does not "bend" the vains, he replaces everything in the convertor with new billet parts. You get a few re-stalls with the convertor when you buy it so if it is not exactly what you want he will change it up for you at no cost. He worked with me until it was perfect, not once did he get agrivated, he was way more conserned with getting it just right then I was. Look them up on the internet and I think you will be very impressed. You will have a hard time finding a better convertor then his.
#15
torque converter
Torque converter services here in South carolina, top notch stuff!
(803)754-8139
Builds chris tootens converters. Converters hold's records all over. Customer service 2nd to none. Only one I use.
(803)754-8139
Builds chris tootens converters. Converters hold's records all over. Customer service 2nd to none. Only one I use.
#16
ALL the fast cars in South Florida are running FTI converters. Great support and a winning product.
http://fticonverters.com/
http://fticonverters.com/
#17
i contacted FTI with there website request, I normally dont get a chance throught the day to call anyone and by the time I get off everyone is also off. How much do the FTI's run for the most part since there site doesnt have pricing.
#19
I hate it when they dont put up pricing, atleast put up a general price range. i know my buddies 4l60e convertor cost him a lil over 1,000 i due believe
#20
I don't have a Turbo car but I second that on the PTC.. The best customer service in my oppinion. They will go above and beyond to make things right.. I have a 8" 5000 stall converter and a FMVB th350 tranny all built by PTC..
My best 60ft so far was with the old 4l60E tranny and a PTC 4000 stall converter. I went 1.46 60ft. with a stock bottom end 3600lb LS1 on the motor
My best 60ft so far was with the old 4l60E tranny and a PTC 4000 stall converter. I went 1.46 60ft. with a stock bottom end 3600lb LS1 on the motor
Last edited by odarabla; 08-08-2010 at 02:27 PM.