LS6427

iTrader: (2)

Thats what his site says.....I would say its a typo before I thought Tom Nelson was BS'ing.
Here's what the page for the 402 TT says:

402 LSX Injected and Intercooled Twin Turbo
1050 HP with 1000 TQ using pump gas and 1600 HP with 1560
TQ using race gas at only 14 PSI. Built and designed for those
who want to drive the hell out of their car, with brutal power
and extreme reliability. This motor will get you in the 8’s at
over 150 MPH in the quarter mile... on pump gas!

GM LSX 6 BOLT BLOCK 9.240 DECK
CALLIES 4340 FORGED 4.0 CRANKSHAFT
OLIVER 4340 BILLET CONNECTING RODS 6.0
JE FORGED PISTONS
HELL FIRE
CLEVITE ENGINE BEARINGS H SERIES
HYDRAULIC ROLLER CAMSHAFT/LIFTERS
ALL PRO 6 BOLT
GM INTAKE 90 MM TB
COMETIC MULTI LAYER
ARP STUDS
MODIFIED LS6
BILLET CNC DAMPER
ELECTROMOTIVE LAP TOP PROGRAMMABLE
60-2 CRANK TRIGGER WITH 4 IGNITION COILS
STAINLESS STEEL TUBULAR EX HEADERS
2 72MM TURBONETICS TANG.
TIAL 44 MM V-BAND BILLET WASTEGATES
TIAL
CUSTOM TO YOUR APPLICATION
BILLET FABRICATION SHEETMETAL BILLET RAILS
AEROMOTIVE FUEL PUMP AND FILTERS

.

atomicfusion

Dyno Sheet

MECHAM

iTrader: (4)

i need ur tuner...mines in the 3rd week of tuning

ZL1Killa

iTrader: (17)

couldn't get a RPM pickup signal reading ??

gotta love electronics. if you couldn't get the reading...make sure you have all of your grounds connected & look for the pink wire...lol.

MECHAM

iTrader: (4)

sry if i missed it but what size injectors?

DomesticAbuse

iTrader: (2)

Awesome Build

Beaflag VonRathburg

iTrader: (176)

Those are some really impressive numbers on only 15psi.

atomicfusion

you can call the shop and ask for Eric 614-444-5884

atomicfusion

We have the RPM one too, not sure why he put it up on speed, but probably for the comparison charts we have up on another site.

atomicfusion

220lb

stmz28

iTrader: (9)

Did you make it down the track if so what were the times

speedfreak391

iTrader: (2)

You my friend have one hell of a car! I have no idea what that kind of hp feels like. But I hope to find out what 600-800 at the wheels is like next year when my car is done. Beautiful car man!

atomicfusion

No, the track was closed, but we are leaving at 3:30 today to head to Kil-Kare raceway in Xenia Ohio.

atomicfusion

Track was a learning experience tonight, just trying to figure out the new setup. No full passes due to traction issues.

atomicfusion

Car is ready to go back out... just need a good track to hit...

Beau@SDPC

iTrader: (14)

You use MPH when RPM signal gets a little squirrelly with a stall converter. The graph comes out cleaner and easier to see everything. Otherwise if/when the converter flashes it comes out rather interesting to say the least.

I must say one sick build.

droksformula

iTrader: (18)

OH MY ! Do you know what your current race weight is ? I have a friend that had his TT c6 down into the 2800lb-ish range wo/ driver

atomicfusion

Haven't weighed it since the changes, but last year it was 3430 with me in it.

Gordon0652

iTrader: (4)

I'm speechless. ummm, AWESOME! Great Work!
It made 12xx rwhp on what gas?
Is there specs of the engine? Must have missed them...

lswon240

Very envious beautiful car and great build would like to see some video of this thing setting sideways on the highways