MPT-70 build thread with dyno results
#2
Launching!
Thread Starter
iTrader: (13)
Join Date: Aug 2008
Location: Greenwood, LA
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Little info....
It has a custom cam, springs, push rods and rod bolts. Its on e85 and 12-13lbs of boost. It put down 655hp and 604tq corrected at 5000ft. It made 538hp here in Albuquerque.
It has a custom cam, springs, push rods and rod bolts. Its on e85 and 12-13lbs of boost. It put down 655hp and 604tq corrected at 5000ft. It made 538hp here in Albuquerque.
#7
Launching!
Thread Starter
iTrader: (13)
Join Date: Aug 2008
Location: Greenwood, LA
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
A single spal 16". I might put a pusher fan in too. If not i am just gonna wrap everything. I drove it today and it didn't go over 210 in stop and go traffic for 20 miles.
Trending Topics
#12
Launching!
Thread Starter
iTrader: (13)
Join Date: Aug 2008
Location: Greenwood, LA
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Maybe but i think it would have put more out with my combo if i would have pushed it harder. They advertise 700 but i also have a 3.5" downpipe housing instead of their 3" housing that came with it.
#15
Launching!
Thread Starter
iTrader: (13)
Join Date: Aug 2008
Location: Greenwood, LA
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
I have been thinking about it. I have a couple local guys that want me to make them one within a month or two. I have a dummy motor to use as a jig and everything lol.
#16
11 Second Club
iTrader: (74)
That'll help a lot, the exhaust side on the MPT70s is so dinky its a big restriction regardless though. Those are great numbers, mine did 616/634 with the MPT70 @ 15psi on 91 pump and 70/30 meth/water mix. The guys that tune my car keep telling me it'll pick up 50rwhp with a change to E85...I just can't afford the injectors, driver box and 8AN feed at the moment!
#17
Launching!
Thread Starter
iTrader: (13)
Join Date: Aug 2008
Location: Greenwood, LA
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Took it to the track tonight and with a 7500da it went 10.52 at 130 with a shitty 60ft. I am gonna put some gears in it and get some slicks. Our track and drag radials dont mix.
Last edited by 505OUTLAWZWS6; 08-28-2010 at 03:42 AM.
#20
Launching!
Thread Starter
iTrader: (13)
Join Date: Aug 2008
Location: Greenwood, LA
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
New best 10.39 at 133 on 11lbs of boost, 1.48 60'. Any more boost i need slicks. I get such bad tire shake at anything over 11lbs. I have some vids i will try and get them uploaded tomorrow night. Oh and that is with stock front suspension with cut coils because my qa1s took a **** last week.
Last edited by 505OUTLAWZWS6; 08-29-2010 at 01:56 AM.