Will a 76 p trim a good turbo to use on a 408 stroker.

 

Nope.

 

On a more serious note. Can we get some more details?

 

Tsp 408 stroker fully forged and blue printed 9.2to 1 compression afr 225 72cc heads fast 102 mm intake and throttle 1.7 harland sharp rockers meziere electric water pump ain't picked out a cam yet

Cam recommendations would be very appreciated.

 

I really meant about the type of driving you will be doing. I would say an 88 would be about the smallest I would go on a motor that large. A small turbo like that will be good for a hi tq, low rpm street car but if you want efficiency your gonna need to step up to atleast an 88mm turbo.

 

You need a 114 mm with a billett wheel!!!!!!!!!

 

Ptrim on a 408 is funny

 

228/228

 

also for 408ci you need to run at least 88mm turbo

 

turbo is too small.

 

Hate to sound like a broken record, our 390 would be a better choice then 408 with that head unit, and stronger. Its designed specifically for small frame turbocharger and D1SC, S-trim, novi 2000 etc

https://ls1tech.com/forums/forced-in...rankshaft.html

 

A 408 would choke like a rock with a 76mm turbo.

You need something in the 88-91 range. Something like this would fit the bill....

 

^
theres your answer op
problem solved!