divided t4 and spool
01-31-2011, 03:22 PM
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Jan 2006
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
divided t4 and spool On a single turbo divided t4 setup to help spool. Can you take one bank to one side of the t4 flange and the other bank to the other side of the flange?
Or do you need to group certain cylinders together for best results?
Anybody have comparison results with divided to undivided?
Or do you need to group certain cylinders together for best results?
Anybody have comparison results with divided to undivided?
01-31-2011, 03:31 PM
#2
Launching!
Join Date: Apr 2010
Location: Sand Springs, OK
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
Im not the person to take advice from on the subject...
But, it just seems like half of a t4 flange per bank could be a flow restriction and limit you on the top end.
Then again, i DO NOT know what i am talking about.
But, it just seems like half of a t4 flange per bank could be a flow restriction and limit you on the top end.
Then again, i DO NOT know what i am talking about.
01-31-2011, 07:02 PM
#3
what is the difference between 1 bank flowing through .5X or 2 banks flowing through 1X?
.
.
.
i doubt there will be much of any difference on a V8 between divided or undivided, there are just too many exhaust pulses at any given time to see a real performance advantage
something like a 4 banger sees the benefits though
my hotside is divided, only reason is because it was easy to do, not really for performance
