All this activity and no timeslips?????
02-04-2011, 07:58 PM
#21
We just got a foot and a half of snow...no track time for a looooooong time :-) And i'm waitin on my bigger turbo.......and a trans...............WTF however, before the trans left me.....it went 9.90 @ 137 on a run file and went through the traps at 11.8 on the wideband. however, I have no clue how to upload a picture of my timeslips......
Last edited by 020NN20; 02-04-2011 at 08:04 PM.
02-05-2011, 09:11 AM
#25
TECH Enthusiast
Join Date: Sep 2010
Location: North Central Ohio
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
I am one of those dreamers.
I work two jobs and have started having homes rehabbed to resale.
The harder I work it seems the farther away my dreams get.
This weather is too wicked.
I work two jobs and have started having homes rehabbed to resale.
The harder I work it seems the farther away my dreams get.
This weather is too wicked.
02-05-2011, 09:27 AM
#26
Here is what we did before the weather turned to ice/snow here in DFW.
--------------------------------------------------------------
First off, a big thank you to Santos (Silver Bullet C6) for allowing me to build him a nice setup and push it really hard.
I told him this is "The Little Blower That Could."
FYI: We realize there is always someone quicker/faster than you.
We think we got the CorvetteForum 1/4 & 1/8 Mile Record for Stock Internals LS3 with A6 and Power Adder.
-------------------------
Best Time on 1/22/2011
1.46 60ft
6.26@110mph
9.75@139mph
Track DA was 222 ft.
-------------------------
2008 Corvette A6
Stock LS3 shortblock
Stock heads
-----------------
A&A Si Trim S/C 6-rib with Flip Drive(no belt slip)
A&A Inline Fuel System
FIC Custom 90# Shortys
RR Ultra-Grip 3.00" Pulley
13# Boost
220/220 Cam
Kooks 1 3/4" Headers, 3" offroad X-pipe, Corsa Sports
Alky Control Dual nozzle Meth Injection: M3 Pre-blower, M15 Pre-T/B
RPM Built 3.42 Diff
Century Built A6
Yank 3200 Stall
Custom 18x11 Rear Rims 305/35/18 MT Drag Radials
GTO Front Skinnies w/ M&H Tires
Pfadt Inverted Sport Shocks (Adjusted for drag racing)
RMS 2 BAR SD Tuned
----------------
First run off the street it ran a 10.13@135
Then got faster every run as we dialed in the suspension and tune.
We ran 7 of 10 runs in the 9's. It was really consistent. Very quick and fun to drive.
--------------------------
2 nice photos from the pro-camera person at the track.
---------------------------
And of course the only proof we like to see. VIDEO!
http://www.youtube.com/user/rmsman?f.../0/4EVRPh6PLNg
--------------------------------------------------------------
First off, a big thank you to Santos (Silver Bullet C6) for allowing me to build him a nice setup and push it really hard.
I told him this is "The Little Blower That Could."
FYI: We realize there is always someone quicker/faster than you.
We think we got the CorvetteForum 1/4 & 1/8 Mile Record for Stock Internals LS3 with A6 and Power Adder.
-------------------------
Best Time on 1/22/2011
1.46 60ft
6.26@110mph
9.75@139mph
Track DA was 222 ft.
-------------------------
2008 Corvette A6
Stock LS3 shortblock
Stock heads
-----------------
A&A Si Trim S/C 6-rib with Flip Drive(no belt slip)
A&A Inline Fuel System
FIC Custom 90# Shortys
RR Ultra-Grip 3.00" Pulley
13# Boost
220/220 Cam
Kooks 1 3/4" Headers, 3" offroad X-pipe, Corsa Sports
Alky Control Dual nozzle Meth Injection: M3 Pre-blower, M15 Pre-T/B
RPM Built 3.42 Diff
Century Built A6
Yank 3200 Stall
Custom 18x11 Rear Rims 305/35/18 MT Drag Radials
GTO Front Skinnies w/ M&H Tires
Pfadt Inverted Sport Shocks (Adjusted for drag racing)
RMS 2 BAR SD Tuned
----------------
First run off the street it ran a 10.13@135
Then got faster every run as we dialed in the suspension and tune.
We ran 7 of 10 runs in the 9's. It was really consistent. Very quick and fun to drive.
--------------------------
2 nice photos from the pro-camera person at the track.
---------------------------
And of course the only proof we like to see. VIDEO!
http://www.youtube.com/user/rmsman?f.../0/4EVRPh6PLNg
https://ls1tech.com/forums/forced-in...mile-list.html
02-05-2011, 09:32 AM
#27
I went and saw the Top Fuel guys "testing" yesterday. It wasn't what I thought. I thought that there were just a couple of teams here. I was wrong. They are ALL here. It was freaking awesome. Best pass was a 3.77 @ 320+ MPH. Bunch of 3 second and over 300 MPH passes. Best part was that it was 20 min from home and you're no more than 30 feet from the starting line without ridiculous crowds. AWESOME.
02-05-2011, 09:49 AM
#28
12 Second Club
iTrader: (10)
Join Date: Dec 2006
Location: Fannett, Tx
Posts: 1,316
Likes: 0
Received 0 Likes
on
0 Posts
I went and saw the Top Fuel guys "testing" yesterday. It wasn't what I thought. I thought that there were just a couple of teams here. I was wrong. They are ALL here. It was freaking awesome. Best pass was a 3.77 @ 320+ MPH. Bunch of 3 second and over 300 MPH passes. Best part was that it was 20 min from home and you're no more than 30 feet from the starting line without ridiculous crowds. AWESOME.
02-08-2011, 05:25 PM
#32
10 Second Club
iTrader: (11)
Join Date: Apr 2003
Location: Surf City, NC
Posts: 1,151
Likes: 0
Received 0 Likes
on
0 Posts
I have a few adjustments to make now since I got booted after running 10.2-10.3 a few weeks ago. I am in the hunt for some 9's before I do a blower swap though. 
02-27-2011, 10:50 PM
#36
02-27-2011, 11:37 PM
#37
10 Second Club
iTrader: (13)
Join Date: Feb 2006
Location: MOREHEAD KY
Posts: 3,297
Likes: 0
Received 0 Likes
on
0 Posts
waiting on the trans-brake to get here and then put the trans back in.open day for us here is march 19th ....if this bitch dont run 9s im going to burn it to the ******* ground.
02-28-2011, 03:30 AM
#38
Wish you the best of luck. 
