Coating internal engine parts....
Thread Starter
Under criminal investigation for fraud
iTrader: (-2)
Joined: Jan 2004
Posts: 1,350
Likes: 0
Coating internal engine parts.... How is the interest in this option? We offer a full line of coatings. We can coat anything from main & rod bearings to connecting rods and cranks. We do a lotof the ceramic top coatings and teflon skirt coatings. The prices are reasonable also.
Any one running a blower, turbo, or even a nitrous motor should consider the ceramic top coatings. This coating keeps the heat from soaking through the pistons prolonging their life and also keeps your heat where it is supposed to be.....in the combustion chamber.
We use a oil shedding coating on the crank & rods, what this does is keeps oil from cling on to these parts and decreases windage in the motor. You can also use this coating on the oil pan, windage tray and oil pump pickup. We have even used it on the timing gears.
We can coat any engine parts that you buy from us, all youhave to do is let us know at the time of order. I will get some pic's of the stuff that we have coated up here so you guy's can check them out.
Thanks,
Any one running a blower, turbo, or even a nitrous motor should consider the ceramic top coatings. This coating keeps the heat from soaking through the pistons prolonging their life and also keeps your heat where it is supposed to be.....in the combustion chamber.
We use a oil shedding coating on the crank & rods, what this does is keeps oil from cling on to these parts and decreases windage in the motor. You can also use this coating on the oil pan, windage tray and oil pump pickup. We have even used it on the timing gears.
We can coat any engine parts that you buy from us, all youhave to do is let us know at the time of order. I will get some pic's of the stuff that we have coated up here so you guy's can check them out.
Thanks,
TECH Regular
Joined: Jul 2002
Posts: 403
Likes: 0
From: Essexville,MI
Chris
Wouldve liked my internals coated before the install but oh well!
You got that qoute done for my friend? Email me at beatrice212121@aol.com if so.
Thanks
Andy
Wouldve liked my internals coated before the install but oh well!
You got that qoute done for my friend? Email me at beatrice212121@aol.com if so.
Thanks
Andy
Thread Starter
Under criminal investigation for fraud
iTrader: (-2)
Joined: Jan 2004
Posts: 1,350
Likes: 0
Andy, qoute was sent I will resend. Let me know if you get this one.
Jammer, Yes I can coat your exhaust ports, $96 for all of the exhaust ports.
Texas Terminator, ya for what it cost's it's not bad insurance.
Jammer, Yes I can coat your exhaust ports, $96 for all of the exhaust ports.
Texas Terminator, ya for what it cost's it's not bad insurance.
Trending Topics
TECH Regular
Joined: Jul 2002
Posts: 403
Likes: 0
From: Essexville,MI
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
