ac and what else?
Thread Starter
TECH Fanatic
Joined: Oct 2002
Posts: 1,648
Likes: 0
From: F.H,Waterford,Port Huron, MI
ac and what else? OK, I removed the ac pump,condencer, and that tank thing. But what is that big black thing on the firewall? Can it be removed or is there the blower motor in there, and if i still do remove it then what am I left with defrost only? Or no b/c of blower motor. All I want is defrost!
I was going to remove everything vents, controls, ac, ect... and replace the open space behind the plated off firewall with a small race unit with just a on/off switch!
I was going to remove everything vents, controls, ac, ect... and replace the open space behind the plated off firewall with a small race unit with just a on/off switch!
that black box is your heater defrost blower.
so if you get rid of that you'll lose defrost.
they do have smaller heater/blower units available, like in jegs or summit for racing applications but then you have to rig up your ducting to the defroster.
so if you get rid of that you'll lose defrost.
they do have smaller heater/blower units available, like in jegs or summit for racing applications but then you have to rig up your ducting to the defroster.
Originally Posted by 2FAST4U
OK, I removed the ac pump,condencer, and that tank thing. But what is that big black thing on the firewall? Can it be removed or is there the blower motor in there, and if i still do remove it then what am I left with defrost only? Or no b/c of blower motor. All I want is defrost!
I was going to remove everything vents, controls, ac, ect... and replace the open space behind the plated off firewall with a small race unit with just a on/off switch!
I was going to remove everything vents, controls, ac, ect... and replace the open space behind the plated off firewall with a small race unit with just a on/off switch!
You have to remove the dash to get the box out. The heater core and motor are behind the firewall.
Originally Posted by 2FAST4U
I don't understand
Cut it off where. what does it look like from the engine bay? Where does your plate go thanks!
Cut it off where. what does it look like from the engine bay? Where does your plate go thanks!
Last edited by streetbad; Feb 22, 2004 at 10:07 PM.
Trending Topics
Thread Starter
TECH Fanatic
Joined: Oct 2002
Posts: 1,648
Likes: 0
From: F.H,Waterford,Port Huron, MI
Oh so the plate will make the firewall flat! Then all the the blower and defrost goes inside the car. I didn't get the cuting the black box part. I am sure that it will all come together whrn the das is off!
Ya F.H is farmingtion hills I'll see you around if you go to the donut shop this summer!!
Ya F.H is farmingtion hills I'll see you around if you go to the donut shop this summer!!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
