Alternator mount pics
04-08-2011, 08:55 AM
#61
TECH Resident
Join Date: Dec 2008
Posts: 995
Likes: 0
Received 0 Likes
on
0 Posts
I am in for one if it will fit stock idler and 145 amp truck alternator.
The way I understood it, Motovative is waiting a response from Nitroused383 to make this available to F-body owners. Hope this turns out good for all.
The way I understood it, Motovative is waiting a response from Nitroused383 to make this available to F-body owners. Hope this turns out good for all.
04-19-2011, 05:13 AM
#64
Sorry no drawing other than what I posted. I have been pretty busy getting my car back on the road lately. I will send Motovative a complete setup when I get a little free time. I have a few of just the bracket made but that's only half the battle. I haven't even had time to put one of these updated brackets on my car! I will say I haven't thrown a belt yet though 
04-22-2011, 10:42 PM
#65
Launching!
iTrader: (11)
Join Date: Sep 2007
Location: Hillsdale, Michigan
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
This would be the optimal bracket for my setup
I also have the ability to layout a bracket with a CMM and do a CAD design if needed
let me know if it is needed...
If not I may wait until they come out (hopefully soon)
I also have the ability to layout a bracket with a CMM and do a CAD design if needed
let me know if it is needed...
If not I may wait until they come out (hopefully soon)
04-28-2011, 02:51 PM
#72
Hopefully I will have time today to finish up the tensioner brackets. The thing is solid, nothing no vibration has caused anything to move. I've put over 500 miles on it with quite a few 6000 rpm pulls, belt is still on and in one piece. When you tighten both bolts that hold the alternator, it doesn't move.
04-28-2011, 09:35 PM
#76
made one off of the layout you posted on page two, however, i didnt have any aluminum stock laying around so its steel.....still 1/2" thick....mine definitely doesnt vibrate....:-) put it on last night and its awesome so far...belt tracks perfectly and no slippage whatsoever.....Thanks a million times man!!!!!
05-08-2011, 03:10 AM
#80
I just finished the tensioner bracket and spacers. Two will be going out monday, one to Motovative and another to a lucky someone Sorry it's taking so long but spare time has been scarce. You know what they say though, you get what you pay for... or not hehe 
Sorry it's taking so long but spare time has been scarce. You know what they say though, you get what you pay for... or not hehe