Procharger kit
#1
TECH Regular
Thread Starter
iTrader: (4)
Join Date: Feb 2011
Location: Stamford, ct
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
Procharger kit
hey im trying to buy a procharger kit and a guy just sent me this pic it looks like everything is here, but could anyone spot anything that i might need (Bob heard your the man im looking for)
Last edited by lbm13186; 03-30-2011 at 09:23 PM.
#3
8 sec potential, 12 sec slip
iTrader: (50)
No, thats definitely an LS1 bracket. Looks like the outlet of the blower is clocked up instead of down tho. Thats easy to fix, just loosen the bolts around the perimeter and turn it and tighten them back down.
Looks like everything is there. I dont see the hardware, but I'm assuming thats all in the bag there. Also, dont see a filter, but those are cheap.
Looks like everything is there. I dont see the hardware, but I'm assuming thats all in the bag there. Also, dont see a filter, but those are cheap.
#4
TECH Regular
Thread Starter
iTrader: (4)
Join Date: Feb 2011
Location: Stamford, ct
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
this is a f1 kit and said from a ls1, but you said it needs to be flipped (thanks i need all the help i can get on this one)so he is selling it for $3800, but your right dont see the filter. besides that it sounds like a good deal to me no???
thanks again guys
thanks again guys
#5
TECH Regular
Thread Starter
iTrader: (4)
Join Date: Feb 2011
Location: Stamford, ct
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
missing from another kit that someone had on here "Missing colder plugs, the cruise control/air relocation brackets, horn relocation bracket, and the air intake for the procharger", does it look like these are here, idk what they look like and what kind of spark plugs r the best (is that what this guy meant by colder plugs?)
#6
8 sec potential, 12 sec slip
iTrader: (50)
3800 is for sure a good deal for a F1 kit. You dont need the horn relocation bracket or cruise control relocation bracket, you can make them work with a little ingenuity. Yes, you'll need to get 1-2 step colder plugs with a blower. How much boost are you planning on running? Stock engine?
Also, if thats an F1, you should seriously consider the big red race BPV.
You will also need a better than stock fuel system with an F1.
The dual ICs will become somewhat of a restriction, but that may help you make less boost for the moment if you are trying to keep it modest at first. I'd reccommend a meth kit also.
Its hard to tell from the pic, but is that an 8 rib setup? (Are the pulleys 8 rib?) A 6 rib definitely wont cut it with an F1. And on that note, if it is an 8 rib, you will need to get an ATI superdamper to attach the crank pulley. Also, pin your crank.
Dont forget you'll need gauges. Boost, fuel pressure, and a wideband are the best.
Hope your trans and rear end can handle the power too..
Lots of other stuff to consider as you can see. So your $3800 initial investment will only lead to a huge nickle and dime fest. Hope you're ready
Also, if thats an F1, you should seriously consider the big red race BPV.
You will also need a better than stock fuel system with an F1.
The dual ICs will become somewhat of a restriction, but that may help you make less boost for the moment if you are trying to keep it modest at first. I'd reccommend a meth kit also.
Its hard to tell from the pic, but is that an 8 rib setup? (Are the pulleys 8 rib?) A 6 rib definitely wont cut it with an F1. And on that note, if it is an 8 rib, you will need to get an ATI superdamper to attach the crank pulley. Also, pin your crank.
Dont forget you'll need gauges. Boost, fuel pressure, and a wideband are the best.
Hope your trans and rear end can handle the power too..
Lots of other stuff to consider as you can see. So your $3800 initial investment will only lead to a huge nickle and dime fest. Hope you're ready
#7
yes u will need a crank pinning kit. if u dont have one PM me. i have the one i purchased from Bob but i didnt need it because i have a aftermarket crank that was already keyed. Mine is for sale if u want it PM me.
Trending Topics
#8
LS1Tech Sponsor
iTrader: (16)
Make sure it is an 8 rib kit.
NGK TR6 (pn#4177 gapped at .032) spark plugs are what you need. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#9
8 sec potential, 12 sec slip
iTrader: (50)
Also get a pic of the serial# and call procharger and ask them for all records they have of that head unit. They can tell you stuff like what date it was first sold, how many times oil has been ordered for it (thru procharger at least), what car it was purchased for, etc.
#10
TECH Regular
Thread Starter
iTrader: (4)
Join Date: Feb 2011
Location: Stamford, ct
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
im planning on braking in the engine at 8 lb (forged 6.0 iron block, w/ brute speed fi cam (just ordered from bob)) im waiting on a fuel system from lonnie performance
Big red race bpv??
duel ics??? and ya im trying to keep it low for the brake in
and ya im ordering all the gauges
hope the rear end holds up until next winter when i can replace it (not going to do any hard starts until i replace it and going to run street tires until that point)
going to call procharger today have serial number already
keep it coming guys if you think of anything
Big red race bpv??
duel ics??? and ya im trying to keep it low for the brake in
and ya im ordering all the gauges
hope the rear end holds up until next winter when i can replace it (not going to do any hard starts until i replace it and going to run street tires until that point)
going to call procharger today have serial number already
keep it coming guys if you think of anything
#11
LS1Tech Sponsor
iTrader: (16)
Thanks for the camshaft order, I appreciate it! Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#18
TECH Regular
Thread Starter
iTrader: (4)
Join Date: Feb 2011
Location: Stamford, ct
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
so i guess all i need to make this all work out would be a pinning kit if my crank is not keyed?
and big red race bvp
chad what r the dual IC's
and do i need to get the superdampner to get this system to work or could i get away without it for right now. Budget is getting close and would like to get it on the road but dont wana mess anything up at the same time.
and big red race bvp
chad what r the dual IC's
and do i need to get the superdampner to get this system to work or could i get away without it for right now. Budget is getting close and would like to get it on the road but dont wana mess anything up at the same time.
#19
8 sec potential, 12 sec slip
iTrader: (50)
so i guess all i need to make this all work out would be a pinning kit if my crank is not keyed?
and big red race bvp
chad what r the dual IC's
and do i need to get the superdampner to get this system to work or could i get away without it for right now. Budget is getting close and would like to get it on the road but dont wana mess anything up at the same time.
and big red race bvp
chad what r the dual IC's
and do i need to get the superdampner to get this system to work or could i get away without it for right now. Budget is getting close and would like to get it on the road but dont wana mess anything up at the same time.
You dont NEED the race bypass valve (BPV) for now, but I'd put it on your list as one of the first things to upgrade when funds becomes available. Bob has the best price on it new if you cant find a used one.
Dual IC= dual intercoolers. Those box looking things in your pics that cool the charged air. The dual IC setup is more restrictive than a single big front mount intercooler setup (FMIC)... But again, thats something you can live with for now until more funds become available to do a FMIC upgrade.