Ratical

iTrader: (82)

I see you decided to relocate your wastegate with the new setup Curt. Do you think that will be a better location for control or was it just for aesthetic appeal? Definitely look cleaner that way.

MillsMotorvation

Looks to be going great!

MUSTANGBRKR02

iTrader: (91)

Looks good. I am doing the same thing right now.

ls1curt

iTrader: (31)

Thanks guys.

The wastegate location before was defiently better but it was much easier doing it this way and will still control down to 6 psi.

ls1curt

iTrader: (31)

No I didn't.

MillsMotorvation

I was wanting to know was that a stock flex plate? What type trans you run?

Camaro9969

iTrader: (12)

What kind of timing are you running when your on the brake?

ls1curt

iTrader: (31)

its a hughs flexplate and a th400

Camaro9969

iTrader: (12)

You play around with the timing off the 2step or even before it will make that thing spool completely different. There are tons of threads on YB talking about it check it out. That or maybe your converter is too hardcore lol

ls1curt

iTrader: (31)

I havnt messed with the tune at all yet but footbraking to 2000 and then going on the tbrake I can have 10psi almost instantly.

Camaro9969

iTrader: (12)

That's great I'm sure you can't launch much more than 10psi anyways without those tires spinning. But gotta say the new mt drag radials you have hook very well.

93camaro_zzz

iTrader: (13)

Looking great Curt! I am interested to see the differences with going to a 2" crossover pipe. I am looking at running that size or maybe just slightly bigger at 2.25" on mine.

ls1curt

iTrader: (31)

Went up to Slowhawks dyno day a couple weeks ago. Made 851/737 on ~14psi through the 2" hotpipes

Mystery Bird

iTrader: (7)

When are we going to see this at the track again?

93camaro_zzz

iTrader: (13)

Sweet bajeebus! Sounds awesome man! Can you tell a difference in the spool with the new smaller pipes?

ls1curt

iTrader: (31)

hopefully 2 or 3 weeks. got all of my safety gear now so it should be good.

ls1curt

iTrader: (31)

Thanks. Yes, spools much quicker than before

ls1curt

iTrader: (31)

Went to the track Saturday. Did my licensing passes and also got a new PB. Went a 1.30 and 1.31 60' during the licensing passes but went hard left one pass and kept going up on the other. Tried to limit it more but then it spun. Dropped the launch boost down a little for the last pass and ran it all the way out.

Mystery Bird

iTrader: (7)

Congrats man. Now you don't have to worry about getting your wrist band cut.

bfurches

iTrader: (12)

The car looked AWESOME man. I still can't get over how tame that thing is at the line until its up on boost.

Badass for sure.