First hits on new budget magnum turbos - BIG THANKS TO MODULAR TURBO!
#41
FormerVendor
iTrader: (14)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Congrats man, that is kickass!
Are you going to build a new motor now?![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Also to everyone else check out our new Magnum builder in our new online store
http://vtsql.gkvbf.servertrust.com/category-s/1819.htm
Magnum FTW!
Are you going to build a new motor now?
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Also to everyone else check out our new Magnum builder in our new online store
http://vtsql.gkvbf.servertrust.com/category-s/1819.htm
Magnum FTW!
#43
10 Second Club
iTrader: (10)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have seen your car on the bullet before in the sleepers thread.
That is one helluva sleeper, I'm sure you have hurt numerous vette owners feelings with that car.
Does it the hit the tires hard enough to pull the front end? Just asking as I'm sure that short wheelbase is fuuuuuun on a really sticky track or on a track with poor prep past the 330' when the power really comes in.
That is one helluva sleeper, I'm sure you have hurt numerous vette owners feelings with that car.
Does it the hit the tires hard enough to pull the front end? Just asking as I'm sure that short wheelbase is fuuuuuun on a really sticky track or on a track with poor prep past the 330' when the power really comes in.
#45
TECH Resident
Thread Starter
iTrader: (3)
Join Date: Oct 2006
Location: edmonton alberta canada
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Gm ecm on a 3 bar SD operating system, msbc-1 boost controller. Leave around 4500rpm and 6 or so psi. I did scale it last year but haven't had a chance this year yet. Just swapped to afco double adjustable rear shocks and just trying to get a handle on them.
#47
TECH Resident
Thread Starter
iTrader: (3)
Join Date: Oct 2006
Location: edmonton alberta canada
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hey guys I am just putting out a feeler for the car, I am considering selling it complete turn key and building something else. THe car is obviously SUPER well known , doesnt matter what track I am at or what city I am in people seem to know the car.
The car was just featured in a cartech book called "Sleepers, The art of the deceptivley fast automobile"
The car has so far ran the following on 275 drag radials:
Best 60 Foot: 1.340
Best 1/8 Et: 5.50
Best 1/8 MPH: 131
Best 1/4 Et: 8.55
Best 1/4 MPH: 162.5
I am certain with some more tuning and runs on a good track it can run some 8.4x's or faster.
On 21 psi it makes over 1100+ rwhp and 935+ Rwtq, or it can be turned down on 10 psi it makes 790rwhp. Can be driven anywhere just a little loud and no tunes.
I just got the car appraised for north of 54k and I can provide all of that info to anyone seriously intrested, The car has all REAL and all GOOD parts in it no junk, Full cro-mo 10 point cage certified to 8.50 etc etc.
Anyone looking for more info or details please pm me.
Entertaining offers over 28k
The car was just featured in a cartech book called "Sleepers, The art of the deceptivley fast automobile"
The car has so far ran the following on 275 drag radials:
Best 60 Foot: 1.340
Best 1/8 Et: 5.50
Best 1/8 MPH: 131
Best 1/4 Et: 8.55
Best 1/4 MPH: 162.5
I am certain with some more tuning and runs on a good track it can run some 8.4x's or faster.
On 21 psi it makes over 1100+ rwhp and 935+ Rwtq, or it can be turned down on 10 psi it makes 790rwhp. Can be driven anywhere just a little loud and no tunes.
I just got the car appraised for north of 54k and I can provide all of that info to anyone seriously intrested, The car has all REAL and all GOOD parts in it no junk, Full cro-mo 10 point cage certified to 8.50 etc etc.
Anyone looking for more info or details please pm me.
Entertaining offers over 28k
![](http://i1103.photobucket.com/albums/g478/HorsepowerSolutions/270023_10150321914665751_658515750_9826672_1967863_n.jpg)
#51
TECH Resident
Thread Starter
iTrader: (3)
Join Date: Oct 2006
Location: edmonton alberta canada
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This was our final weekend racing I ran some new bests and overall ran a bunch of passes faster then my previous bests 8.53,8.51,8.50,8.47,8.53 I could not have had as good of a year as I did nor could I have had the car run as good as it did all season with NO issues if it wasnt for a few people:
Leanne
My family
James,Jordan
The whole HPS crew
Flyin Ryan Bell
Randy @ Pro Stock
Rob@modular turbo
These are my bests from the weekend:
1/4 et - 8.47
1/4 mph - 163.5
1/8 et - 5.43
1/8 mph 131.5
Here is a video of an 8.50 pass it power wheelied for quite a ways and set the tires down with a little puff of smoke LOL
http://www.youtube.com/watch?v=VJNTCXfz1Ns
I will post some more pics and videos and some in car vids as we collect them all.
Leanne
My family
James,Jordan
The whole HPS crew
Flyin Ryan Bell
Randy @ Pro Stock
Rob@modular turbo
These are my bests from the weekend:
1/4 et - 8.47
1/4 mph - 163.5
1/8 et - 5.43
1/8 mph 131.5
Here is a video of an 8.50 pass it power wheelied for quite a ways and set the tires down with a little puff of smoke LOL
http://www.youtube.com/watch?v=VJNTCXfz1Ns
I will post some more pics and videos and some in car vids as we collect them all.
Last edited by tirefryin_s10; 10-04-2011 at 11:23 AM.
#53
TECH Resident
Thread Starter
iTrader: (3)
Join Date: Oct 2006
Location: edmonton alberta canada
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here is an in car video of the 8.47 pass, Mind the go pro rattling against the door frame.
http://www.youtube.com/watch?v=TF1ZmFhHZ3A
http://www.youtube.com/watch?v=TF1ZmFhHZ3A