which tensioner pulley for LSX procharger?
#1
On The Tree
Thread Starter
Join Date: Jan 2008
Location: Delaware
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Can anyone tell me what application's tensioner pulley i need for an LSX procharger kit? I tried my fbody tensioner and of course that one doesnt work. Does it need to be from an 05 vette and up like the rest of the accessories?
Also where can i find a 05 and up vetter power steering pulley? The part stores around here dont seem to carry them. And for people running a remote reservoir are you running straight rubber hose to the reservoir, or any hard parts/connectors?
Also where can i find a 05 and up vetter power steering pulley? The part stores around here dont seem to carry them. And for people running a remote reservoir are you running straight rubber hose to the reservoir, or any hard parts/connectors?
#2
LS1Tech Sponsor
iTrader: (16)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
•Power Steering Pump: #15261472 - Substitute Part: 25960709
(with corresponding pulley) http://www.gmpartsgiant.com/parts/gm-pump-25960709.html
•Belt Tensioner: #12569301 - 2005-2010 C6 Corvette Drive Belt Tensioner http://www.byunspeed.com/product_inf...ducts_id=12544
The power steering system is under high pressure, I would use a good quality hose spec'd for power steering and use power steering hose ends. Earls, Aeroquip and Russell all make the hose and hose ends. Bob
(with corresponding pulley) http://www.gmpartsgiant.com/parts/gm-pump-25960709.html
•Belt Tensioner: #12569301 - 2005-2010 C6 Corvette Drive Belt Tensioner http://www.byunspeed.com/product_inf...ducts_id=12544
The power steering system is under high pressure, I would use a good quality hose spec'd for power steering and use power steering hose ends. Earls, Aeroquip and Russell all make the hose and hose ends. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
#4
LS1Tech Sponsor
iTrader: (16)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
![](https://ls1tech.com/forums/signaturepics/sigpic168855_1.gif)
#5
On The Tree
Thread Starter
Join Date: Jan 2008
Location: Delaware
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
thanks for the help gentlemen. i have a new problem though now. the corvette ps pump pulley is too big, it hits my steering box.(g body swap) i got a corsica pulley but it requires a bigger shaft size than what is on the corvette ps pump. is there a smaller pulley that will fit the corvette ps pump???