30" tires now working on my LSX Drag Radial Vette
07-11-2011, 07:57 PM
#21
7 Second Club
Thread Starter
Join Date: May 2007
Location: Columbus, Ohio
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
http://www.youtube.com/watch?v=KTt03k67V2Y
Different perspective of the launch.... I spun this pass, but it shows you what the car does when it leaves....
Different perspective of the launch.... I spun this pass, but it shows you what the car does when it leaves....
07-11-2011, 08:34 PM
#22
7 Second Club
Thread Starter
Join Date: May 2007
Location: Columbus, Ohio
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
07-12-2011, 06:32 AM
#27
TECH Senior Member
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
car looked great!
can you post the other incrementals from the runs? How much boost on those runs?
07-12-2011, 10:08 AM
#29
I'm not telling you how to do it but the number that is important is the boost pressure when you generate wheel speed. Didn't realize you were 3600#, its going to be an uphill battle to get it to come around but you can get there. You may need alittle more time on the brake to get the boost to level out.
07-12-2011, 05:58 PM
#36
7 Second Club
Thread Starter
Join Date: May 2007
Location: Columbus, Ohio
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
My break pedal sensor is touchy, that's all... I have had it recalibrated a couple of times, but with the manual brakes there is a touch of slop at the top of the pedal and sometimes it triggers the sensor.
07-12-2011, 06:01 PM
#37
7 Second Club
Thread Starter
Join Date: May 2007
Location: Columbus, Ohio
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
I'm not telling you how to do it but the number that is important is the boost pressure when you generate wheel speed. Didn't realize you were 3600#, its going to be an uphill battle to get it to come around but you can get there. You may need alittle more time on the brake to get the boost to level out.
I have never had these issues before so I will be learning as I go.
Things we "plan" on trying this weekend are
1) increasing launch boost
2) playing with ramp time
3) increaseing launch RPM
4) working on spool time
I don't really know which will make the most difference, but we will be trying to figure it out.
If I could, I would chop 300lbs out of the car and I think that would solve a lot of problems.
