MAP Sensor advice needed.
07-13-2011, 12:23 PM
#1
Teching In
Thread Starter
Join Date: Jul 2011
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
MAP Sensor advice needed. Hi
My car is fitted with a Maggie 2300 supercharger kit which reuses the std OEM MAP sensor I would like to replace it with a 1.5 or 2 bar sensor.
I only 2bar Sensor number I have tracked down is 12615136 is a wrong shape and has plug in the wrong location.
Does anyone know which 1.5 or 2 bar sensors will fit onto the Maggie in place of the current 1 Bar GM sensor (part no 16212460) that is currently installed.
Thanks In Advance
My car is fitted with a Maggie 2300 supercharger kit which reuses the std OEM MAP sensor I would like to replace it with a 1.5 or 2 bar sensor.
I only 2bar Sensor number I have tracked down is 12615136 is a wrong shape and has plug in the wrong location.
Does anyone know which 1.5 or 2 bar sensors will fit onto the Maggie in place of the current 1 Bar GM sensor (part no 16212460) that is currently installed.
Thanks In Advance
07-13-2011, 02:04 PM
#2
TECH Enthusiast
Join Date: Mar 2010
Location: Utah
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
07-13-2011, 05:12 PM
#3
Teching In
Thread Starter
Join Date: Jul 2011
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Do you know where i can find a data sheet for this device?
I will need to change the Map Entries in the tune file so will need to the enter in place the stock 1bar settings in the following PIDS.
{B2101} MAP Sensor Scaler
{B2103} MAP Sensor Offset
{B2104} MAP Default for Throttle DTC
{B2105} MAP Sample Rate
07-13-2011, 05:28 PM
#5
TECH Enthusiast
Join Date: Mar 2010
Location: Utah
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
Thanks - this looks like it will fit
Do you know where i can find a data sheet for this device?
I will need to change the Map Entries in the tune file so will need to the enter in place the stock 1bar settings in the following PIDS.
{B2101} MAP Sensor Scaler
{B2103} MAP Sensor Offset
{B2104} MAP Default for Throttle DTC
{B2105} MAP Sample Rate
Do you know where i can find a data sheet for this device?
I will need to change the Map Entries in the tune file so will need to the enter in place the stock 1bar settings in the following PIDS.
{B2101} MAP Sensor Scaler
{B2103} MAP Sensor Offset
{B2104} MAP Default for Throttle DTC
{B2105} MAP Sample Rate
I wouldn't know man. I have HP Tuners...all that is already figured when I switched to the 2 bar OS
