Swapping in the new ERL Powerplant...
Thread Starter
7 Second Club
Joined: May 2007
Posts: 863
Likes: 0
From: Columbus, Ohio
rofl...
Are those stock rockers on the old motor?
Are those stock rockers on the old motor?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Wow, that's impressive!
And still wished had got atomic orange for my z06. Was torn up between Velocity yellow and Atomic orange but in the end classy but boring silver won out. Mostly for resale reasons as plan to likely trade up to c7 in couple years unless they don't have a big cube engine anymore in them ,then might get c7 and keep the c6 z06.
Anyway you have a beautiful car and of course fast as frak. I am leaving my z06 stock for near future but that edelbrock blower might be in the more distant future for it.No turbos though and no heavy modding on my future cars. But nice to keep one crazy modded up car in the stable.
So how about a bit more detail on your ERL engine? cam ,etc if none of that is secret info.
Mine is 427 ,ls3 core. set up to run 6 bolt if want to later. Running afr 225 now ,wish afr would make some 6 bolt heads already! Mlld ls9 cam, lunati link bar lifters, yella terra 1.7 rockers,slp oil pump and double roller. Fast 90 /nick williams 90 for now.Had no problems with fast leaking so far but was running low boost with my 408 last year.408 spun a bearing near end of last season. 427 has callies dragonslayer,manley pro rods ,wisecos and pretty sure 9.5 to one compression.
Should be up and running in a week or so. Engine in car just finishing up some details.
Anyway best of luck with your new ERL motor!
Anyway you have a beautiful car and of course fast as frak. I am leaving my z06 stock for near future but that edelbrock blower might be in the more distant future for it.No turbos though and no heavy modding on my future cars. But nice to keep one crazy modded up car in the stable.
So how about a bit more detail on your ERL engine? cam ,etc if none of that is secret info.
Mine is 427 ,ls3 core. set up to run 6 bolt if want to later. Running afr 225 now ,wish afr would make some 6 bolt heads already! Mlld ls9 cam, lunati link bar lifters, yella terra 1.7 rockers,slp oil pump and double roller. Fast 90 /nick williams 90 for now.Had no problems with fast leaking so far but was running low boost with my 408 last year.408 spun a bearing near end of last season. 427 has callies dragonslayer,manley pro rods ,wisecos and pretty sure 9.5 to one compression.
Should be up and running in a week or so. Engine in car just finishing up some details.
Anyway best of luck with your new ERL motor!
I want to say that Mark and MY99TAWS6 have more money than you two combined could ever know what to do with besides buy ERL motors, All Pro heads, and Atomic Oragne ZO6's!!! Keep it up guys you make us little guys that much more hungry!!!
This is a pretty dumb post