sponsors or shops that make turbo kits for my goal at 1000hp
08-31-2011, 06:45 AM
#1
sponsors or shops that make turbo kits for my goal at 1000hp ok i have a long block in place to have as a foundation for my build. but what im looking for is a turbo kit that will get me there with a/c if possible and streetable. I have looked at the sponsors and really dont have kits to sell what im looking. Most sell prochargers or small turbos. My goal is 1000hp street machine. Please if you know anyone or shop that makes turbo kits lmk!! Most likely the car will be in the DFW area when it gets back from overseas and im doing my research to start my build. Thanks!!
08-31-2011, 07:32 AM
#2
10 Second Club
Join Date: May 2008
Location: Cleveland GA USA
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
ok i have a long block in place to have as a foundation for my build. but what im looking for is a turbo kit that will get me there with a/c if possible and streetable. I have looked at the sponsors and really dont have kits to sell what im looking. Most sell prochargers or small turbos. My goal is 1000hp street machine. Please if you know anyone or shop that makes turbo kits lmk!! Most likely the car will be in the DFW area when it gets back from overseas and im doing my research to start my build. Thanks!!
Vengeance Racing ask for Ron (the owner) . They probably already have a kit. Bell Chassis works is more one off custom builds. Hope this helps.
Apparently phone numbers are not allowed to share unless you are a paying sponsor here. If you want the best there is PM me and I'll give you their cell phone numbers.
Last edited by KeithBerryZ06; 08-31-2011 at 09:27 PM.
08-31-2011, 10:04 AM
#5
Rob also has hotside piping for T4 turbo's, and can weld a T6 flange on for you if you wanted to go bigger.
MM has a 91mm comp side 88mm turbine side t-4 turbo. It's pushed over 1000rwhp all day long, and ran 8.59@160+. If that's not fast enough for you I don't know what is.
And just to let you know that turbo spools quick, I've seen dave lay down black marks over 150ft long just by punching it at 35-40mph in 2nd gear all the way through 3rd and the spool was instantaneous.
MM has a 91mm comp side 88mm turbine side t-4 turbo. It's pushed over 1000rwhp all day long, and ran 8.59@160+. If that's not fast enough for you I don't know what is.
And just to let you know that turbo spools quick, I've seen dave lay down black marks over 150ft long just by punching it at 35-40mph in 2nd gear all the way through 3rd and the spool was instantaneous.
