The results are in!!!! And I'm a VERY happy camper!! D1SC tuned! **Videos Uploaded!*
#25
I like em alot. They really bring the boost on quickly. 1st gear is completely useless, so it takes alot of feathering to take of in a hurry. 2nd gear u have to feather the throttle if it's cold out. Warmer weather it will spin for a second then finally hook. I can spin em some in 3rd at about 50-60ish. And these are 315 nittos nt01s lol. I'd hate to see if I still had stock wheels and tires lol
Thank ya sir! I was surprised! My tuner said he could probably get me over 600 but he wanted to keep the tune safe so I ended up with 571. Plenty for now!
Thank ya sir! I was surprised! My tuner said he could probably get me over 600 but he wanted to keep the tune safe so I ended up with 571. Plenty for now!
#26
yeah I was thinking about doing the same setup in my car. Now my cam is not really a friendly boost cam but makes me happy that you got 571 on only 6 lbs. I was thinking about 7-8 pounds since my cR is very close to stock still.
#27
Ya I'm stock compression and I have the torques v3 which is 231/234 .648/.598 111lsa. So it's not the best cam for boost but I really didn't bleed any boost at all. The map sensor read 5.5-6 psi and held up top. It didn't drop. And I'm
Using a 4.38" blower pulley. A 4.50" will get ya about 8psi on a stock motor so I'm thinkin I'm right where I should b at in terms of boost
Using a 4.38" blower pulley. A 4.50" will get ya about 8psi on a stock motor so I'm thinkin I'm right where I should b at in terms of boost