Ok, I have a 1998 z28. I just recently bought a p1sc kit off of a 02 GT mustang, Iv got a good idea of what ill need to install kit but its still my first rodeo so im not 100% sure on where im at.. I have a single race inter-cooler to install from the kit as well....so any hints tips or ticks would be greatly appreciated..

thanks...

 

Is it a reverse rotation procharger?

 

I agree, if it came off a mustang I would think it is standard rotation and you need a reverse rotation HU to work on your car.. Call procharger, give them the serial number and they will confirm for you.

 

He said it came off of an '02 GT. '96-'04 GT kits are all reverse rotation 10:00 clocking just like LS1 F-bodies.

 

Correct, the blower is exactly what you need. Here are most of the parts you will need. Send me an e-mail to brutespeed@gmail.com and I'll e-mail you a copy of the installation manual. Bob

http://shop.brutespeed.com/ATI-3GJBB...I-3GJBB-02.htm
ProCharger 8 rib main bracket
or:
http://shop.brutespeed.com/Aster-Aut...er-Bracket.htm
Aster bracket and water pump.

http://shop.brutespeed.com/ATI-MF006...-MF006I-24.htm
http://shop.brutespeed.com/ATI-MP006...I-MP006I-3.htm
http://shop.brutespeed.com/ATI-MF006...I-MF006I-0.htm
Fan and fan sheetmetal

http://shop.brutespeed.com/ATI-DC017...DC017A-008.htm
Crank pulley

http://shop.brutespeed.com/ATI-DPxxx...-ATI-DPxxx.htm
Blower pulley

http://shop.brutespeed.com/ATI-3FASS...-3FASS-004.htm
Race valve if you are going to use aluminum tubing.

http://shop.brutespeed.com/ATI-Perfo...-AT-918853.htm
Required balancer

http://shop.brutespeed.com/ATI-3GKMM...-3GKMM-004.htm
Crank pinning kit

http://shop.brutespeed.com/ATI-1GJ11...-1GJ115-IC.htm
Here is the ProCharger front mount kit, it uses steel tubing.

http://shop.brutespeed.com/ATI-AIGI3...AIGI3I-015.htm
http://shop.brutespeed.com/ATI-AF057...AF057I-001.htm
Air inlet assembly

 

bob.. thank you tonz man!!

 

I've probably got most the parts laying around (other than the idler) to get it mounted.

 

You're welcome. Bob