Built 348 Twin turbo sizing
01-26-2012, 10:32 PM
#23
Launching!
Thread Starter
iTrader: (13)
Join Date: Aug 2008
Location: Greenwood, LA
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Here is my build thread. I will be updating daily as my plans are to make it to tx2k12 in 6 weeks.
http://truestreetcars.com/forums/pro...rbo-build.html
http://truestreetcars.com/forums/pro...rbo-build.html
03-26-2012, 08:48 AM
#27
On The Tree
iTrader: (15)
Join Date: Mar 2005
Location: Odessa, Tx
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Ive got the same turbos about ready to fire it up... Its a built 370ci with 1/2 in head studs and a half filled block. These turbos should put down some good numbers at the track!
01-13-2021, 09:16 PM
#31
Turbo sizing and backpressure on ls3 I have a 2010 camaro ss. Its a sbe ls3, m6, btr stage 4 na cam, arh longtubes and 3.91 gears. I am planning to use either an agp or huron speed twin turbo kit. Both kits have 2.25 inch hotside connection pipes and agp uses a t3 housing and huron uses vband housings. Because of the cam and gearing, i need to keep backpressure as low as possible. I will be using equal length shorties as opposed to stock manifolds as a means of reducing preturbine backpressure. My question is should i fabricate 2.5 or 3 inch connection pipes for the turbines or would 2.25 be enough and will a pair or 6266 .82 ar turbos be sufficient to keep backpressure at a minimum. The car currently peaks around 6800 to 7000 rpm.
Last edited by Bluto2010; 01-13-2021 at 09:23 PM.
