nastylx

What is needed to do e85 swap

Camaro9969

iTrader: (12)

Thank you!!
Yes stock bottom. Just the ls2 style if you want to call that more stout.

Camaro9969

iTrader: (12)

Whats your fuel system?? Basically just 30% larger than you would want it for pump gas.

SPAZ-3

amazing car amazing build man, hoping to do a similar setup in few months

Camaro9969

iTrader: (12)

Thanks!!! Got a big part of the cage done worked on it all day will be finishing it up today

Sales@Tick

iTrader: (3)

Looks really good!

mrstepheneades

cage looks good man..... people dont realize how much time goes into these builds

Camaro9969

iTrader: (12)

Thanks its just about done but your right its crazy how much goes into a build if you want to do it the right way. And to think I don't even have a forged motor lol......
So what you guys think bullhorn or just what I have currently? This is a street car mind you.

Sarg

iTrader: (6)

You talking about for the turbo inlet?

Camaro9969

iTrader: (12)

No the exhaust. Most of the promod and outlaw 10.5 cars run them. Obviously my car is NOTHING compared to those just like them ever since I went to englishtown last year so bad *** just not sure on a "street car"

nastylx

Bullhorn?

Turnin20s

iTrader: (12)

No on the bullhorn IMHO. It will probably attract too much of the wrong attention

akCamaross

Hey man, just read through all the pages and i must say this is a beautiful and impressive build. I just picked up a 96 Z/28, i have the 10 point cage getting welded in this weekend. Im go to do the LQ4 with a TH400 RVB and moser 9in rear. Im also doing the S480 turbo build. So we are in the same boat. Going to be a Street/Drag car. Any pointers?

mrstepheneades

Even though it would look awesome, I like mine only sticking out a inch or so because like other guy said it will attract cops and other "NOT COOL WITH YOUR BAD *** CAR" people lol.

Camaro9969

iTrader: (12)

You don't think the 5" already does that? LOL

Ya take a look at all the outlaw 10.5 and promod cars (again hard comparison since they are all amazing cars)


Thanks I appreciate that! Mine is the same Street/Strip. Well there are a lot of little things i learned along the way with this. I could give you a ton of pointers just depends which direction your looking to go with the build. Stock motor? Fuel? Suspension?



Ya mine is only out about 2" at the most at an angle which i like just figured why not be even more Obnoxious LOL

Sarg

iTrader: (6)

Think honestly a 5" exhaust will be its own "bullhorn" for the wrong and right type of attention, lmao.

Turnin20s

iTrader: (12)

LOL I understand that, but to the untrained eye the 5" isn't as noticeable as the bullhorn, thats all I was saying

akCamaross

Im going to be doing a Street/Drag car on a medium budget. Going to do the 6.0 lq4 motor and run it basically stock.. but from what i was reading on yours is you did a couple small things to your engine, and im thinking of doing the same. For fuel im going to do pump gas for now and later on going to be looking at E85. Suspension is going to be more of a drag set up / its also getting a 10 point cage. Thanks man.

steveo_f8

iTrader: (6)

if you like the bullhorn do it. I think it could be cool, like you said you already have a 5" pipe sticking out... I personally like the flanges in the bumper with the DP cut flush...

Can you photoshop it?

Awesome build btw!

Camaro9969

iTrader: (12)

Hahaha I wish I could! I think ill buy one and maybe do a flange so I can take it off and throw it on anytime I want