gt91 408 cnc ls3 heads hows this cam look
#1
TECH Apprentice
Thread Starter
iTrader: (9)
Join Date: Jan 2007
Location: york pa
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
gt91 408 cnc ls3 heads hows this cam look
231/235. 617/.621. On a 114
Iam looking for a agressive cam and this is what tsp came up with
408 ci , cnc ls3 heads , ported ls3 intake
Th400 trans with 3400 stall 9" ford 3.23 gears
Turbo is a gt91 t6 1.08 exhaust 5" down pipe
Iam looking for a agressive cam and this is what tsp came up with
408 ci , cnc ls3 heads , ported ls3 intake
Th400 trans with 3400 stall 9" ford 3.23 gears
Turbo is a gt91 t6 1.08 exhaust 5" down pipe
#2
I wouldn't say its aggressive ...I'm running a 230 238 on 114 575 585 on a 402 l92 heads 9.3cr t6 88mm 1.08a/r it has 14 in vac at idle and pulls at 1100 rpm in fifth gear.
#7
11 Second Club
iTrader: (22)
Just for point of comparison, I did some online chat with Comp Cams yesterday speccing a cam for a LS2 402/GT91 turbo build I'm going to start, and they came up with a 243/243 .624/.624 115+2 LSA cam. I specced it a bit more towards drag car than street car, but just something for you to compare against