PCV/ Catch Can help please.
#42
TECH Fanatic
iTrader: (10)
Join Date: Mar 2011
Location: Miami gardens FL 33055
Posts: 1,023
Likes: 0
Received 0 Likes
on
0 Posts
Camster catch can...
OK, here's a pix of the Camster catch can, and the some of the raw materials used, the top thin wall tubing is 3/4 inch OD, not 5/8 as i previously stated, the OD of the canister itself, is 3" and the full length is 5 1/2 inches long.
The top tubing for the filter i reused by running a 3/8 pipe thread inside for the -an fitting, so the same can be used, for the filter or the hose fitting, if you want to connect to the intake manifold or pre filter. I hope this reveal, is a blessing to you, It'l be nice to know if it is, and show us your version, and hopefully, this selfless act will stimulate you to share some of your own tricks with others, i pledge to reveal anther free horse power trick, after two or more of you share some of own tricks, if the OP does't mind.