2000RATA

You need to get over having the non sponsor stuff deleted. You know the rules.
And there is sponsor stuff on here that is far more impressive than this.

ryle

iTrader: (19)

I agree there is SOME sponsor stuff on here that is more impressive if you don't mind paying top dollar for something that is functionally the same. And yes I know the rules. I never once posted any prices or contact information. If someone seeks me out for information it is not soliciting. The case for soliciting was so weak that the mod had to put for an infractionin "PM SENT"

And btw that's not the reason why I started this thread. It was just to get some reactions to the kit and every reaction I got for it was positive.

willizm

iTrader: (10)

What does it matter. Aren't we a community of people trying to help each other out? It's not like he's selling these kits and not willing to be a sponsor. Someone asked and he answered. 0 f*cks should be given. Are we going to go through all the posts on here where someone mentioned that they picked up something at Napa, Autozone, or Amazon.com and delete it because they aren't a sponsor?

Hey guys, guess what? I made my own brake booster T using copper fittings from Ace Hardware. Where is my infraction? Someone better start cleaning up all those ebay turbo kits including the on3 kits, I'm pretty sure they aren't a sponsor.

NemeSS

iTrader: (127)

how is fitment with stock kmember?
send me info plz.
any more installation pics?

NemeSS

iTrader: (127)

i dont see wg location in the pics

ryle

iTrader: (19)

Fitment with the stock kmember is good, but obviously a tubular kmember would give you more room. I don't have any more pics right now, but I can get some more if you so desire. Just let me know what you are wanting to see and I'll see what I can do.
You are right, the wastegate is not shown in the pics but it is there. It is located just below the turbo flange right after the merge. It sits just in front of the power steering pump.

mrstepheneades

Awesome kit. I want a kit like this when time comes on big cube and use a 91mm if possible. Is it possible on this style kit?

mrstepheneades

What radiator did you use for this. Trying to get my parts list together. Do you have room for the condensor in front of it?

ryle

iTrader: (19)

Sorry I didn't get back to you sooner. The radiator I used is a Griffin 1-25241-X. for more detailed pics of where I cut and how it was installed check out the build thread in my sig.

YURVIEW

iTrader: (127)

reviving this..... where did you mount the AC condensor?? I do not see it in pics. and how is the car cooling??

ryle

iTrader: (19)

The A/C condenser is actually mounted in front of the radiator. I bought a custom condenser and ran new lines.

As far as cooling goes I have no issues. I have a 180 stat and the temps never go above 190.

fastls1inaz

iTrader: (2)

PM Sent to OP.

deiselfever1

i am looking hard at a turbo kit, could i get the guys info that built it?

Burken01

iTrader: (88)

Pm the original poster..

ryle

iTrader: (19)

I have been getting a lot of requests for info on the builder of my kit. Up until recently I havent been able to say who it was but he is now working at Straightline performance so the mods cant give me any bs anymore about nonsponsor soliciting

This kit was built by TurboJoe@Straightline. Joe is a stand up guy and the quality of his work has only gotten better! This kit was one of his early ones and was more a prototype. I have personally seen a few of his newer kits and they are absolutely amazing! Kinda makes me want to have him re-do mine... A quick search will show pictures of his newer kits.

Turbo Joe
Ls1tech: TurboJoe@Straightline
Phone: 815-485-7741

NOLA

iTrader: (1)

Is this kit still available?