Project Red Headed Screamer: Destroked 6.0, 333ci 12.5:1, twin 6468s, faceplated T56
05-23-2013, 07:19 PM
#165
You should give me your valve covers, they would match nicely.
Thanks! It will be done by Car Craft, it will be in the TPIS booth!
06-18-2013, 09:18 PM
#172
The car has to be on the road, running, driving, tuned, and bugs worked out by July 12th. At this point it's looking like the date this will happen is July 11th. 
No time to work on the damn thing yet, but I'm going to make time starting tomorrow! Got everything laid out ready to bolt in, except for a transmission. The "tranzilla" I bought wasn't a tranzilla at all, just a viper mainshaft T56. Pretty upset about that to say the least, but I have a lead on a different T56 now.
But here is another pic of the engine all ready to drop in to hold you over! Got an ATI super damper and a different throttle body, and got the throttle bracket fabbed up. Also had to modify my holley rails for the intake, and got some new Bosch 240lb high impedance injectors!
No time to work on the damn thing yet, but I'm going to make time starting tomorrow! Got everything laid out ready to bolt in, except for a transmission. The "tranzilla" I bought wasn't a tranzilla at all, just a viper mainshaft T56. Pretty upset about that to say the least, but I have a lead on a different T56 now.But here is another pic of the engine all ready to drop in to hold you over! Got an ATI super damper and a different throttle body, and got the throttle bracket fabbed up. Also had to modify my holley rails for the intake, and got some new Bosch 240lb high impedance injectors!
06-21-2013, 12:08 AM
#175
With the stock LS3 mani, running on E85, made 499.9HP/434TQ NA. Would've liked to dyno it with this sheetmetal now, an see what it would pick up, but its down to the wire now. Need to get the car done! Here's the NA graph overlaid with the 16psi graph.
It'll make it! Just a few more days of procrastination is all I need.
07-13-2013, 08:17 AM
#177
Just got it running yesterday, so didn't make my deadline unfortunately. The tune needs plenty of work, but so far it definitely feels like it will be a monster! Got on it with 10-11psi, and got a little vid. The faceplated trans is great, loves the high RPM shifts. Can't wait to get it tuned in and dialed up, and really run it through the gears! Look for some RWHP numbers next weekend. I will try to get a few pics too. Here's a vid, I was just rolling into it once it cleared out, the tune has a flat spot on the throttle tip in, also don't mind the boost and fuel pressure gauge taped to the windshield
Last edited by Jakson; 07-13-2013 at 08:52 AM.
I'm looking forward to more videos and numbers, sounds like it will be a handful 
