Superman09

iTrader: (65)

We sell it as you see on the website with or without turbo, gate, blow off valve and then we sell just the Hotside alone (crossover, down pipe, gaskets, and alternator brackets)

GreatWhiteZ28

iTrader: (15)

whats the hotside alone run? sorry, I'm on my phone and it's a PITA to bring up some websites sometimes...

bluestreak98

iTrader: (21)

I wish this kit retained facory A/C!

99_pewterZ_A4

iTrader: (1)

So this is just a cold side? Or both?

I'm a boost noob at the moment.

Huron Speed

iTrader: (1)

we sell the kit in a variety of ways.

1. hot side alone.
2. hot side, cold side, intercooler couplers clamps etc. we call that a "bare" kit.
3. a complete kit. with turbo, wg, bov etc.

hope this helps!

Casey

Superman09

iTrader: (65)

We are just starting to sell the hot side alone so it is not on the site yet, but it consists of:

Crossover Pipe
Downpipe
Gaskets for hotside
Alternator Relocation Brackets

$775 initial pricing

GreatWhiteZ28

iTrader: (15)

That's not bad, one last question, we're does it set the turbo at? I couldn't tell from the pics I've seen.

Superman09

iTrader: (65)

Here is a picture mocked up on the engine stand!

02SOMWS6

iTrader: (6)

How long would a stock engine last behind this?

Superman09

iTrader: (65)

On something around 10 psi or less, give or take 550 rwhp or under and it should last a VERY long time! A good tuner is the key. With a spot on tune you will have nothing to worry about at those levels!

Jon

Superman09

iTrader: (65)

Sale ends tonight! Don't miss your chance to save $300!

Quick teaser cruising video of the shop vehicle below!

killerwhale

dam i missed the sale but im still gonna get me a kit pretty soon

Huron Speed

iTrader: (1)

send me a pm with what you are looking for. i will work with you on a price.

Superman09

iTrader: (65)

No worries, we can get you set-up when you are ready!

killerwhale

thanks guys i will call as soon as im ready.

Superman09

iTrader: (65)

6ltr

Possible to come with a bigger down pipe and a T6 Flange?

Superman09

iTrader: (65)

Possible yes, we can do the t6 flange but the downpipe makes it more difficult with different sizes, turbos, and k members. Possibly in the future we will have a bigger t6 kit but right now all are t4 with the 3" down pipe. We can do a t6 flange though and sell less a down pipe if interested

Jon

obZidian

iTrader: (2)

Bump for a good guy/shop!!

trans2000am

iTrader: (49)

any chance of making just a cross over(t6) up high near the powersteering pump?