waterbug1999

iTrader: (3)

u gonna run 4" exhaust out the passenger side kmember?

SUPERMAN_00TA

iTrader: (25)

Yep I got the pipes yesterday and will get started today and on it by this weekend.

SUPERMAN_00TA

iTrader: (25)

Just a taste of what it looks like from the bottom

LT1TA

iTrader: (17)

man, you arent playing around man. should be up and running soon once you get the drain and feed set up right? have you already set up your ebc?

ls1curt

iTrader: (31)

That should control much better.

I8UR4RD

iTrader: (16)

rapid progress. im ready to see it on the rollers. would have loved to have known what it made on the f1-a for comparison. i see no reason why you should not be well north of 1000

SUPERMAN_00TA

iTrader: (25)

I figured out the cold side piping yesterday...... Im gonna take everything apart and paint and coat........ Then I only need to run the drain and feed, mount the fans and install the ABS delete kit.

LT1TA

iTrader: (17)

nice, i just noticed you managed to keep your front sway. i'm definitely going to aim for that if possible. Who are you getting your coating through or are you doing that yourself too?

SUPERMAN_00TA

iTrader: (25)

Yea man I think I'm dumping my exhaust out the front bumper! I still have the sway bar and plan on keeping it that way. I'm also coating on my own. My ceramic coating will be here Tuesday and so will my feed and drain lines.

LT1TA

iTrader: (17)

i would probably want to do the same if i had to run 5" out. keep in mind if you blow oil through your exhaust, it will land pretty close to the path of your tires if not angled well. and i would also consider wind speeds if you angle it too forward facing

SUPERMAN_00TA

iTrader: (25)

GETTING READY TO SANDBLAST AND LATER CERAMIC COAT AND PAINT.

Turnin20s

iTrader: (12)

^^Nice. You aren't playing around, this thing is getting done haha. I hope mine comes together half as fast

InsaneDomestics

iTrader: (28)

Can't wait to see what this thing does.

SUPERMAN_00TA

iTrader: (25)

Thanks guys!! Im hard at it!! More pictures will follow.

SUPERMAN_00TA

iTrader: (25)

Sand Blasted the paint I sprayed on it.




Heres my ceramic coating.


Coating Done!!!!!










I have wrapped the Down pipe. Im just dumping it for now... it will probably go to a muffler out and out through the front bumper!!



I painted the cold side too!

Turnin20s

iTrader: (12)

You will have to post back up and let us know how that coating holds up. Hopefully its tough because there is no place around here to get coating done.

Again badass progress

waterbug1999

iTrader: (3)

nice man.. i had to cut more then that off my passenger side manifold to fit the 4" under it so it would go all the way out to the tranny.. looks like your moving along pretty good.

LT1TA

iTrader: (17)

looking good man. that looks like some good coating. i think i may prefer that route over the spray can method.

SUPERMAN_00TA

iTrader: (25)

So so Close!!

SKULL

iTrader: (7)

i really really dont like that header design. thats gonna cause SO MUCH turbulence in the exhuast. but i am a fan of any DIY.