turbo experiance
Thread Starter
TECH Addict
Joined: Jul 2003
Posts: 2,124
Likes: 0
From: its as intense as the time i forgot how to sit down
turbo experiance im sure this is a shot in the dark but does anyone have any knowlage on the turbosmart electronic boost controller,im puzzled on the set up
Ive been using one for about a year and it works awesome. Im sure I can help you get it hooked up right. I was one of the first to have one and had to talk to the owner of TurboSmart in Australia to get it working correctly.
Give me a call if you want. 716-542-3997
Eric
Give me a call if you want. 716-542-3997
Eric
anyone want to clear up who had it first 
you can pm or call me too 804-314-7966
for a quick rundown, for my 11psi street setting my:
wastegate has a 10psi spring
boost setpoint is 18
gate pressure is 3.9 (and climbing )
my sensitivity is 25
i have the standard external hose configuration (see latest instructions online on downloads page)
i also spent a lot of time with David Mariott over email and phone to get this thing nailed down for v8 applications.
i have lately been making very noticeable losses in spool time with the gate pressure and sensitivity.. as of right now it overshoots by .1 or .2psi then stabilizes.. i have a feeling i'll be bringing the gate pressure up some more and the sensitivity down some more.. but this all depends on how far over your wastegate spring pressure you go.
just for more info: http://www.turbosmart.com.au/boost_c...electronic.htm
http://community.webshots.com/photo/...96122447kNmSGC
you can pm or call me too 804-314-7966
for a quick rundown, for my 11psi street setting my:
wastegate has a 10psi spring
boost setpoint is 18
gate pressure is 3.9 (and climbing
)my sensitivity is 25
i have the standard external hose configuration (see latest instructions online on downloads page)
i also spent a lot of time with David Mariott over email and phone to get this thing nailed down for v8 applications.
i have lately been making very noticeable losses in spool time with the gate pressure and sensitivity.. as of right now it overshoots by .1 or .2psi then stabilizes.. i have a feeling i'll be bringing the gate pressure up some more and the sensitivity down some more.. but this all depends on how far over your wastegate spring pressure you go.
just for more info: http://www.turbosmart.com.au/boost_c...electronic.htm
http://community.webshots.com/photo/...96122447kNmSGC
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
