Borg Warner
Thread Starter
Launching!
Joined: May 2012
Posts: 249
Likes: 0
From: North Dakota
Borg Warner Anyone know if this would work on a 4.8
http://www.ebay.com/itm/Brand-New-BH...7411b6&vxp=mtr
http://www.ebay.com/itm/Brand-New-BH...7411b6&vxp=mtr
Anyone know if this would work on a 4.8
http://www.ebay.com/itm/Brand-New-BH...7411b6&vxp=mtr
http://www.ebay.com/itm/Brand-New-BH...7411b6&vxp=mtr
Teching In
Joined: Oct 2012
Posts: 3
Likes: 0
It's a T6 exhaust with a 5 inch outlet. The Compressor wheel measures 73.5 x 107.1mm. The turbine wheel measures 97.23 x 86.23mm. He shows it has a BW number 167713 with a 26cm exhaust housing, But Borg Warner shows the 166713 has a 32cm exhaust which is 1.30 A/R
Probably work pretty well. Turbine housing it a touch large if it is a 1.32 but not terrible. The turbine is well suited but a tad large. I would guess it would be good for 700 if you lean on it.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Kind of off topic but i sent your heads out last Thursday. I don't go on Ebay much so i never replied to you when i sent them. I just seen your name on here and realized you were the one who bought them.
Thread Starter
Launching!
Joined: May 2012
Posts: 249
Likes: 0
From: North Dakota
So anyone have an opinion on what would be a better turbo choice this BW or a On3 76mm I already have some On3 .96ar units but was looking for somthing with a bigger turbine. Motor is a build 294ci forged pistons ect. currently with ported 706 heads, .6xx lift turbo cam, Its currently backed by a muncie 4 speed but going with a Glide and a 4000ish stall. I also have a garrett 4202 I could get from a buddy. Motor will be running a blow thru e85 setup. Thanks....
Teching In
Joined: Oct 2012
Posts: 3
Likes: 0
If you wouldn't mind post/pm those links to those other turbos. I would like to see them has those prices are way less than BW sells them for. I see that the one on Ebay says it's a BW turbo, But I see no part number on the compressor cover or a factory tag on the bearing housing. That's what alot of overseas stuff looks like. Not saying it is, Just curious.
