Superman09

iTrader: (65)

Turbos in stock, on the shelf, ready to ship are the following:

TC78's .96 a/r
T7875 .96 a/r
T7575 Billet .96 a/r

Yes, in stock, no build or wait time!

Superman09

iTrader: (65)

Who needs a turbonetics?

Superman09

iTrader: (65)

We have these IN STOCK!

slowride

iTrader: (3)

Can I ask you something? How come when the 7575 came out it was a 7675? I know this one is the billet wheel, but did they actually reduce the size from the early models or was it a bit undersized even back then?

Superman09

iTrader: (65)

It has always been 75.xx mm. Now with both billet and cast I believe they call it 75 to easier differentiate between the 2. In the past I suppose they rounded up and now down.

HolyShiznit

iTrader: (11)

Too bad there isn't a trade in program. My 7475 I got in last years package has the .81/ 3" exit hot side.

Superman09

iTrader: (65)

We have these in stock, shoot me a message if interested and we will work with you as best we can!

Superman09

iTrader: (65)

(2) Billet 7575 .96's
(4) Cast 7875 .96's

IN STOCK!

quez82

iTrader: (1)

I wish I could trade my. 96 AR for the 1.15ar

Superman09

iTrader: (65)

Glad we were able to get you taken care of!

Superman09

iTrader: (65)

Who else needs a 7875 or Billet 7575? I have them on the shelf ready to ship!!

Superman09

iTrader: (65)

We have more 7875's, Billet 7575's and TC78's on the shelf. Contact me to purchase your today with NO build or wait time. Simply order and it will ship out immediately to you!

Superman09

iTrader: (65)

(2) Billet 7575s
(1) Cast 7875

On the Shelf!

Superman09

iTrader: (65)

Superman09

iTrader: (65)

Back up, 7875 and billet 7575 both on the shelf ready to ship!

Superman09

iTrader: (65)

One 7875 and one Billet 7575 on the shelf now while we wait for our next shipment! Get yours today!!

Superman09

iTrader: (65)

I have a few more 7875 .96's and Billet 7575 .96's on the shelf! PM me for a great deal!

MUSTANGBRKR02

iTrader: (91)

Any back to back comparison of these turbos vs the older TC units or vs the Precision 7675?

Superman09

iTrader: (65)

No back to back tests yet that we have heard of, however we have seen very similar results out of them in comparison to the Precision 7675 on customer's car. Also we have had a few customers switch from the TC76 or TC78 to these and comment on a noticeable improvement reducing their back pressure and making more power and the same boost levels. Also allows them to pull higher into the RPM range without the power curling over.

A back to back test would be nice, but alone these units have been putting down some very good numbers!

djt81185

iTrader: (3)

They definitely move some airflow. I went from a tc76 to a 7875 1.15 and due to a stuck Chinese wastegate found out it will make about 23-24psi at 6200 rpm on a 5.3 was seeing 75 %idc on id2ks on e85 at 52 psi base pressure with a 6.6 afr.