Another successful track outting
Another successful track outting Well I went to Cecil this Saturday to make some more passes in the car and see if I could run an 8 on a track that doesn't hook as well as MIR
1st pass off the trailer and waiting out a small rain delay. Exact same tune up as my 8.89@154 pass at MIR 2 weeks Prior. Car spins hard on the launch. I ran it out the back door just to make sure things where ok
2nd pass I dropped the launch psi down to 7 psi from 9psi results
60' 1.476
1/8 5.845@124.68
1/4 8.989@156.15
car felt good launch seemed a little dog is so next pass I raised the launch boost to 8 psi
3rd pass spun hard again and aborted the run
4th pass I dropped the launch psi back down to 7 psi but I upped the down track psi to 15
60' 1.384
1/8 5.690@125.60 <best 1/8 mile
1/4 8.810@157.34
5th pass Same setting as last pass. Spun again and aborted
6th pass dropped the launch rpm by 100 rpm just to help traction
60' 1.414
1/8 5.703@126.41
1/4 8.807@157.91
7th pass raised the down track boost to 16 psi
60' 1.415
1/8 5.704@126.93
1/4 8.796@158.61 <--new best 1/4 pass
I had a great day and I am more than please with the results from the car. I am happy to put the car away for the winter now and no the I have exceeded my goals for the year with the car.
Video from Saturday is still uploading I will post it up once done
Here are a couple pics that Denmah took.
And a pic I took at home after cleaning it up and before going on a cruise
1st pass off the trailer and waiting out a small rain delay. Exact same tune up as my 8.89@154 pass at MIR 2 weeks Prior. Car spins hard on the launch. I ran it out the back door just to make sure things where ok
2nd pass I dropped the launch psi down to 7 psi from 9psi results
60' 1.476
1/8 5.845@124.68
1/4 8.989@156.15
car felt good launch seemed a little dog is so next pass I raised the launch boost to 8 psi
3rd pass spun hard again and aborted the run
4th pass I dropped the launch psi back down to 7 psi but I upped the down track psi to 15
60' 1.384
1/8 5.690@125.60 <best 1/8 mile
1/4 8.810@157.34
5th pass Same setting as last pass. Spun again and aborted
6th pass dropped the launch rpm by 100 rpm just to help traction
60' 1.414
1/8 5.703@126.41
1/4 8.807@157.91
7th pass raised the down track boost to 16 psi
60' 1.415
1/8 5.704@126.93
1/4 8.796@158.61 <--new best 1/4 pass
I had a great day and I am more than please with the results from the car. I am happy to put the car away for the winter now and no the I have exceeded my goals for the year with the car.
Video from Saturday is still uploading I will post it up once done
Here are a couple pics that Denmah took.
And a pic I took at home after cleaning it up and before going on a cruise
Damn Dan. You impress me every time with the results. It keeps getting better and better. If the track can handle it at the hit and you up the down track boost the car will be even faster. You can definitely put it up knowing that it has met your goals.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
im shootn for 150-155mph with my car with a 3.50gear and a 325 radial. damn impressive man, hope my turd goes close to your et/trap when im done, again congrats, thanks for the info
I will have to take some but Those passes still had all the factory plastics in but only the drivers seat. Still the factory seat. I also don't have the radio or HVAC any more. So it is gutted some but still looks relatively stock inside
