BMR Sales2

iTrader: (40)

For some reason I wasn't thinking when I initially responded about the LTx stuff. If you are looking for an LTx style k-member in this new style turbo setup you can use our SBC/BBC turbo k-member (KM015) and the engine stands and everything will bolt right up to LTx block. Here is a quick picture for all you LTx guys:

BMR SBC/BBC turbo k-member (KM015)


We are going to end up having an option for either Delrin or Aluminum solid motor mount bushings for everyone looking to solid mount the engine to the k-member.

djt81185

iTrader: (3)

I was just wondering if it was the same as this k member on summit

http://www.summitracing.com/parts/bmr-km019h

White Fire'99

iTrader: (15)

I'm pretty sure km019 is this Kmember being discussed here. Right?

http://www.bmrsuspension.com/?page=p...productid=1160

BMR Sales2

iTrader: (40)

The KM019 is for the guys using the "APS style" turbo setups that hang the turbos right off the manifolds. The other BMR k-member that is pictured doesn't have a part number yet but we are thinking of changing our current turbo k-members to this new style that is pictured here in this thread so it may end up as the replacement for our current KM013.

Toxic-Evo

iTrader: (2)

this is pretty bad ***.

Glad you guys and DKT teamed up to get these built for us....

Blackpanther99

iTrader: (8)

Pretty tempting

Guitar

iTrader: (9)

How would this fair for primarily street use?

98CamZ28

iTrader: (31)

I was told that it should be plenty strong as it's the same as the SBC/BBC mounts. My car is my daily driver and I will be testing it out extensively very soon

Toxic-Evo

iTrader: (2)

3 guys run these local to me on the street all summer long.

Guitar

iTrader: (9)

That is good to hear. I'll eventually be going turbo with my car and switching the k member either at that or before that time, so this looks like an option that will allow a lot of room.

fastsspr

iTrader: (49)

That s going to be one of my next investments.

BMR Sales2

iTrader: (40)

We have run this same design k-member with our SBC/BBC setups for years and have never had an issue with strength at all. I would have no issue with running one of these on a car that sees daily driving duties.

When you are ready for one give us a call here at the shop and I will make sure we get you taken care of.