Just starting a build, , does anyone make a turbo header for a front mount single setup ? Im looking for the cold and hot side,Im puttin it into a 2nd gen camaro,,, as a bunch of other LS parts, , camaro pan, LS6 intake ????

 

Stainless works is the only one I know of that makes a set, they are just the headers though. You would have to fabricate a cross over pipe and a cold side.

http://www.stainlessworks.net/produc...o-headers.html

 

they are similar to OBX, and twice the price.....

 

anyone have leads on parts ?

 

OBX is similar to stainless works but half the cost

 

I never thought I would hear Stainless Works and OBX in the same sentence. Virginia Speed also makes forward facing SS headers.

 

I checked Virginia speeds website, looks like they sell Kooks headers, neither one of them shows a front facing header. not very good websites

 

stainless works ftw

 

Steinless Works provides them. Good quality as well!

 

yeah i just looked at Virginia Speeds web site and its a big fail. didnt see any thing about turbo headers.

SW ftw

 

fwiw there is a thread on here with the Virginia Speed headers. Search button will net what you're looking for.

 

I was just lookin at that thread...995.00 , they look good, OBX is only 565.00

 

Check out burkhart chassis. Chuck makes a set of stainless turbo headers.

 

starting at 1,000.00

OBX, still the best buy

 

i made mine myself but in an s10. if i can get enough people to buy these headers im going to start selling a universal set thats going to be as compact as possible to leave enough room in the engine bay. they will be $450 shipped 1 5/8" mild steel forward facing headers with gaskets and bolts too. i will be starting a thread here soon with more pics.

 

this looks good ! so far, Id like to see what else your going to do, where your going to place everything ! PM me when you post the pics

 

Thanks man. I'm doing twins so they will branch off of each header but i need some input on either i should v band them or make them with turbo flanges for twins or what not

 

http://shop.brutespeed.com/Stainless...Works-LSXT.htm

http://shop.brutespeed.com/Stainless...rks-LS1DFT.htm

I sell the Stainless Works turbo headers at the above two links. Bob

 

Stainless Works Is a great Choice. We Have them in Up and Forward and Down and Forward. With our Up and Forward Headers they can be reversed for a Down and forward application. There are some attached files to this post with some pictures. These headers and Made fro US Souce 304L Stainless Steel and Fully Constructed at our Cleveland, Ohio Facility. These Headers also carry a limited Lifetime Warranty. Check Them out and let Us here at Stainless Works or one of our Supporting Dealers know if you have any Questions.

Thanks, Chris
Chris@Stainlessworks.net
800-878-3635 EXT 258



Pictures:
The First Three are the LSXT up and Forward
The Second Three are the LSXT reversed to Down and Forward
The Last Three are the LS1DFT Down and Forward.

 

Thanx Chris, they do look great,,I wish I could try both sets, and see what fits my application,,how do we do that ?

Brian