Straightline perf.truck manifold gp
#1
TECH Regular
Thread Starter
iTrader: (75)
Join Date: Dec 2005
Posts: 497
Likes: 0
Received 0 Likes
on
0 Posts
Straightline perf.truck manifold gp
Turbo Joe is now at Straightline Performance, he has given me a chance to try and get 5 buy-ins on this G. P. which would be 6 including mine. This is a super nice kit which retains the alternator and swaybar in the factory location. The kit contains all precision components, also the truck manifold contains v band clamps. Total price shipped $3975.00!! The group buy-in will be $500.00 up front!!
THIS BUY IN WILL B OVER 2/22/2013
The price on this shipped I's gonna b to the lower 48 only don't mind shipping to others but will b at buyers expense
He is gonna do the hot sides for the people that has asked it will include
The crossover,waste gate,manifolds,and down pipe for 1600.00
1-- slolt1
2----Q
3---amttyler1
4
5
6
7
THIS BUY IN WILL B OVER 2/22/2013
The price on this shipped I's gonna b to the lower 48 only don't mind shipping to others but will b at buyers expense
He is gonna do the hot sides for the people that has asked it will include
The crossover,waste gate,manifolds,and down pipe for 1600.00
1-- slolt1
2----Q
3---amttyler1
4
5
6
7
Last edited by slolt1; 02-13-2013 at 12:53 PM.
#4
Here at Straightline Performance we are offering our truck manifold kits at special pricing for the opening of our new turbo fabrication shop. These turbo kits are not the run of the mill, mass built crap from you get from China. Every kit is hand built on a full in house car...not just a front clip! Nothing is jigged or skimped on to cut any costs here. We will be offering this kit to up to 6 people at once. We don't build one kit then send it out to be mass produced!!!
The quick run down on the kit.....
This kit is a one up on the typical run of the mill truck manifold kit. First off this kit does come with the manifolds pre v-banded! Because of this there is no cutting of the passanger side k member at all. In addition of that there is no cost of relocating of the alternator, it keeps that fugly sucker down low where it belongs. Also with this kit and it being hand built it keeps the sway bar in the stock location keepin your car firmly planted on the road! All of our hot side piping used in our kits are full 304 stainless steel...no mild steel used here, As the same for our cold side, we only use 6061 aluminum. Both sides are fully tig welded and fully back purged to ensure perfect weld quality inside and out!
-V banded manifolds
-304SS crossover with 2 o2 bungs and t4 flange & 46mm wastegate flange
-3in down pipe with extra o2 bung ( also enough down pipe to get to side of trans)
-Full cold side piping to intercooler
-Charge pipe with 50mm BOV flange
-All couplers and clamps (your choice of color)
-4x12x31 inch intercooler
-Intercooler support brace
-PW46mm wastegate (Precision)
-PT7675 turbo (Precision & your choice of A/R)
-TiAl 50mm Q blow off valve
-Oil feed & drain lines
3975.00 and free build-installation for any in house car!
This kit is contains top quality PRECISION parts at a true value! There is absoutly nothing skimped on this kit even parts Although if you wish to change parts that can be arranged upon request, same goes with all flanges and bungs.
As most of you know, the PT7675 is one mean turbo with a reputation of winning on the track...the only chinese about our turbo supplier is the egg rolls the employees eat on lunch. Same goes with the wastegate, Its not the normal lil 38mm wastegate most other manifold kits come with. This comes with a matching precision 46mm wastegate and TiAl 50mm q blow off valve in choice of color. Any questions feel free to ask!
Now some pics of the turbo kit and other in house builds....
-
The quick run down on the kit.....
This kit is a one up on the typical run of the mill truck manifold kit. First off this kit does come with the manifolds pre v-banded! Because of this there is no cutting of the passanger side k member at all. In addition of that there is no cost of relocating of the alternator, it keeps that fugly sucker down low where it belongs. Also with this kit and it being hand built it keeps the sway bar in the stock location keepin your car firmly planted on the road! All of our hot side piping used in our kits are full 304 stainless steel...no mild steel used here, As the same for our cold side, we only use 6061 aluminum. Both sides are fully tig welded and fully back purged to ensure perfect weld quality inside and out!
-V banded manifolds
-304SS crossover with 2 o2 bungs and t4 flange & 46mm wastegate flange
-3in down pipe with extra o2 bung ( also enough down pipe to get to side of trans)
-Full cold side piping to intercooler
-Charge pipe with 50mm BOV flange
-All couplers and clamps (your choice of color)
-4x12x31 inch intercooler
-Intercooler support brace
-PW46mm wastegate (Precision)
-PT7675 turbo (Precision & your choice of A/R)
-TiAl 50mm Q blow off valve
-Oil feed & drain lines
3975.00 and free build-installation for any in house car!
This kit is contains top quality PRECISION parts at a true value! There is absoutly nothing skimped on this kit even parts Although if you wish to change parts that can be arranged upon request, same goes with all flanges and bungs.
As most of you know, the PT7675 is one mean turbo with a reputation of winning on the track...the only chinese about our turbo supplier is the egg rolls the employees eat on lunch. Same goes with the wastegate, Its not the normal lil 38mm wastegate most other manifold kits come with. This comes with a matching precision 46mm wastegate and TiAl 50mm q blow off valve in choice of color. Any questions feel free to ask!
Now some pics of the turbo kit and other in house builds....
-
Last edited by TurboJoe@Straightline; 01-28-2013 at 10:51 PM.
Trending Topics
#8
TECH Addict
iTrader: (1)
Join Date: Nov 2001
Location: Michigan
Posts: 2,161
Likes: 0
Received 0 Likes
on
0 Posts
If only I hadn't gotten ripped off by the "front clip man".
This kit would look great on my car. HP potential of that turbo on a properly set up 402 iron block? Any other pics of the twin setup? Keep up the good work.
This kit would look great on my car. HP potential of that turbo on a properly set up 402 iron block? Any other pics of the twin setup? Keep up the good work.
#10
#11
yes, its actually the race version of the mani kit. the kit always comes polished and looks as good in person as in picture!
none so far! it has a upward angle to it...kinda hard to see.
none so far! it has a upward angle to it...kinda hard to see.
#13
yup! its truly a great deal that comes wit crazy good parts that can easly put most 5.3s to 6.0s to the test! This is straightline's style "budget kit". Quality with out sacrifice....no reason to skimp when faced with a deal like this!
right about 370ci is where i would draw the line with the pt7675. although if i were you i would look for bigger and better things to come in the near future
right about 370ci is where i would draw the line with the pt7675. although if i were you i would look for bigger and better things to come in the near future
Last edited by TurboJoe@Straightline; 01-28-2013 at 10:57 PM.
#17
TECH Regular
iTrader: (11)
Join Date: May 2009
Location: Unknown
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
This kit is great. The design and everything about it. Its extremely efficient. I see my kit in one of the pics!!! For what its worth......the price is amazing and turbo joes customer service is even better!!