347-stock 243 heads-Stage 3 cam-YSi-976 rwhp
#1
8 Second Club
Thread Starter
iTrader: (18)
Join Date: Oct 2002
Location: Waterloo, Ontario
Posts: 2,609
Likes: 0
Received 0 Likes
on
0 Posts
347-stock 243 heads-Stage 3 cam-YSi-976 rwhp
Ricky Race Vette's dyno graph.
Just a little forged 347-stock 243 heads, Stage 3 cam and a YSi.
Simple combo-tonnes of power-or JAM!!!
Just a little forged 347-stock 243 heads, Stage 3 cam and a YSi.
Simple combo-tonnes of power-or JAM!!!
#4
FormerVendor
iTrader: (3)
Very nice Arun!!! Hopefully we will be at 800rwhp with our customers stock bottom end C6 LS3 after the heads get back and around this power level when the bottom end gets forged!
I'm also curious how much blower rpm it took to get these numbers as we tried two different pulleys on our customers and really didn't change the boost numbers as much as we thought it would.
I'm also curious how much blower rpm it took to get these numbers as we tried two different pulleys on our customers and really didn't change the boost numbers as much as we thought it would.
Trending Topics
#8
8 Second Club
Thread Starter
iTrader: (18)
Join Date: Oct 2002
Location: Waterloo, Ontario
Posts: 2,609
Likes: 0
Received 0 Likes
on
0 Posts
Very nice Arun!!! Hopefully we will be at 800rwhp with our customers stock bottom end C6 LS3 after the heads get back and around this power level when the bottom end gets forged!
I'm also curious how much blower rpm it took to get these numbers as we tried two different pulleys on our customers and really didn't change the boost numbers as much as we thought it would.
I'm also curious how much blower rpm it took to get these numbers as we tried two different pulleys on our customers and really didn't change the boost numbers as much as we thought it would.
This is Ricky's car from Kentucky-he ran 9.7@147 rowing gears and blowing off his discharge tube with the 2200 when he was making 800rwhp.
His goal is run 8's by the end of the season rowing gears.