Very nice! Only 1000rwhp? lol Something tells me it will be more than that. At any rate, great job! I'll keep watching!

 

Looking real good Nate! keep those pics coming!

 

Car is comming along nicely Ryan.

 

Very nice build! Great parts selection and some super nice fabrication going on there. One day my tig welds will all look like that, lol. In the mean time I will just keep practicing and looking at threads like this for inspiration and something to work towards, lol.

It may have been mentioned, but what sized turbines do those turbos have?

As for the intercooler, I like to keep the option to run pump gas and turn down the boost available, so for me at least I chose to do an intercooler along with the E85.

 

Looks great

 

The turbos are TC76's with the 68mm turbine and .96ar.

3.5" downpipes

 

Sick!

 

Ok those are super nice, but is in not going to burn up the boot on the rack?

 

Im going to make a couple heats shields here and there.

 

Subscribing for results. This is looking good so far.

 

Did I miss it? What is the bore/stroke on your build?

 

Blocks are 4.125 bore standard. So bigger than stock.

 

Beautiful work! Keep it up

 

Nice ! what are the intercooler dimensions? reminds me of my a2a procharger ones?

 

Sick build, in for results...

 

Just curious if this was a final pass?

 

what are you expecting your spool time to be?

 

I try to do one pass on everything. This was one pass. Mulitple passes just put more heat into the metal making it more brittle. Why you asking? Know something I dont? Still learning everyday.

 

I have no idea on spool time , I am guessing 3000 they will be fully spooled. This is my first time playing with FI. LS1NOVA could probably answer your question better.

 

It may be the angle of the picture but it looks like the pipe side has some undercut all the way around. Not judging, just inquiring.