When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I used this stuff and it looks great. I haven't heat cycled it yet though. I chose it because it's air cured. Some of my pieces were too big to fit in my oven http://www.cerakotehightemp.com/fini...glacier-black/
We used that when we put together the racecar, its lasted all season, just be very sure make the substrate clean.. very clean before spraying it.
And be sure to spray it in a paint booth or prep pad to get away from the fumes. The stuff is Ammonia based.. even with a respirator on it choked me out
We used that when we put together the racecar, its lasted all season, just be very sure make the substrate clean.. very clean before spraying it.
And be sure to spray it in a paint booth or prep pad to get away from the fumes. The stuff is Ammonia based.. even with a respirator on it choked me out
good to know! i just ordered a bottle of this for my hotside.... i liked the idea of it being air cured instead of having to bake everything
This is the same Cerakote that people put on their guns, correct? So I could have local gun guy apply this for me? And is the Cerakote mainly for looks, or does it have thermal properties like the ceramic coating in the OP?
This is the same Cerakote that people put on their guns, correct? So I could have local gun guy apply this for me? And is the Cerakote mainly for looks, or does it have thermal properties like the ceramic coating in the OP?
Description:Unsurpassed. No other word can adequetely describe Cerakote C-7600 Glacier Black coating. Formulated to withstand temperatures of over 2,000 degrees Fahrenheit and thermal shock from those temperatures directly into water with no adverse effects, C-7600 retains its deep black, sleek satin finish in the most extreme environments. C-Series coatings are a line of air cured, ready to spray ceramic coatings.
Appearance
* Ultra smooth
* Deep, rich black finish
Application
* Easy to apply, Single coat, Air cure formula
* 85% solids yields higher coverage than any other high temp coating
* Self-leveling properties
Other
* VOC Exempt in all 50 states
Performance *Better thermal barrier properties than any other high temperature coating
* Industry leading heated and un-heated corrosion resistance
* No discoloration, even past 2000
This is the same Cerakote that people put on their guns, correct? So I could have local gun guy apply this for me? And is the Cerakote mainly for looks, or does it have thermal properties like the ceramic coating in the OP?
Mike
Yeah it's the same stuff. Pretty durable coating. Not sure how good the thermal protection is compared to other coatings, but it's good at scratch and ding protection.
Description:Unsurpassed. No other word can adequetely describe Cerakote C-7600 Glacier Black coating. Formulated to withstand temperatures of over 2,000 degrees Fahrenheit and thermal shock from those temperatures directly into water with no adverse effects, C-7600 retains its deep black, sleek satin finish in the most extreme environments. C-Series coatings are a line of air cured, ready to spray ceramic coatings.
Appearance
* Ultra smooth
* Deep, rich black finish
Application
* Easy to apply, Single coat, Air cure formula
* 85% solids yields higher coverage than any other high temp coating
* Self-leveling properties
Other
* VOC Exempt in all 50 states
Performance *Better thermal barrier properties than any other high temperature coating
* Industry leading heated and un-heated corrosion resistance
* No discoloration, even past 2000
That's the stuff we used. It works really good and holds up surprisingly well. Just for the love of all things holy don't spray it without a paint booth or prep pad. It will choke you out, ammonia is no joke.
I'd suggest letting it sit for a week after spraying it just to make sure it totally cures.
We did both turbo manifolds, crossover, wastegate dump tubes, turbine housing (maybe more) and only used about 1/2 to 1/3rd of the container. It's lasted all season of racing, with no real issues.. you'll be surprised how fast it cools down also.
The prep work, IE: sandblasting, masking of v band's and cleaning before spraying are very important. Spending the extra time to be extremely thorough is very important.
I have a little less than a qt of the turbo x black left that I wont be using if anyone is interested. I paid 90 for the qt. Let me double check the exact amount left to determine price. Pm me if interested.
a05c, did you coat the inside of the turbine housing? My guy says they pour the coating inside and tilt the housing to spread it around. Machined areas will be masked.
I don't think it'd be worth the time to be honest. It's such a large chunk of Iron that the benefits wouldn't be worth it. At least in our application.
Hi, thanks for the info as I have used VHT on piston crowns for years.
I have never have a problem with engine damage, a type of damage caused by ceramic "flaking".
I don't think it'd be worth the time to be honest. It's such a large chunk of Iron that the benefits wouldn't be worth it. At least in our application.
I think I read that the inside coating would help keep the heat from penetrating into the housing itself.
I used this stuff and it looks great. I haven't heat cycled it yet though. I chose it because it's air cured. Some of my pieces were too big to fit in my oven http://www.cerakotehightemp.com/fini...glacier-black/
Update: I've ran it for nearly 2 years on the street in all sorts of weather too. Still looks like new. You guys are right about spraying it too. It's rougher than anything I've ever smelled.
Update: I've ran it for nearly 2 years on the street in all sorts of weather too. Still looks like new. You guys are right about spraying it too. It's rougher than anything I've ever smelled.
It made me cough and gag even with a respirator on.. its no joke
so i just got some of this stuff in the mail, ill be doing my hotside when it gets here, sounds like ill be doing it outside from what your guys are saying, can this be brushed on or does it have to be sprayed on? probably better coverage being sprayed on im guessing, i dont care how it turns out honeslty cause im gonna wrap it too