LT1TA

iTrader: (17)

lol!!

I advise the 9" over the 6" ic. The 9" was surprisingly small in there imo. I could only imagine what the 6" would look like once she's all buttoned up.

TurboJoe@Straightline

josh...looking good, you are going to coat that or black paint and wrap???

allout06

iTrader: (11)

ya ill order the bigger IC.

thanks a lot man! my plan is to coat the entire hot side including the turbine housing with "Turbo X black" from techline coatings. then ill wrap the down pipes with titanium colored wrap along with a couple turbo blankets

Blackpanther99

iTrader: (8)

Talk about controlling that heat!

allout06

iTrader: (11)

Theres a couple areas where it gets close to some things, so i wanna make sure the heat stays in and doesnt melt a bunch of ****. I need to figure out how people are wiring up a Magnafuel 4303 pump off the factory harness.

Treys06gto

iTrader: (8)

Any updates?

allout06

iTrader: (11)

not yet. going to try to finish up the wastegates this evening. ill some pics if we make any progress. they're are going to the a BITCH. not very much room and these gates are huge. im ordering the cold side next friday. so there be some.good updates in the next couple weeks. seeing everyone out in their cars is killing me.... lol

Blackpanther99

iTrader: (8)

Gotta have patience Josh!

allout06

iTrader: (11)

thats what i hear. i see a bunch of guys here lately showing of their bolt on cars, and im like daaaammmmnnn iittt i wish mine was done lol. ive never been patient lol

FasTimeSS

iTrader: (47)

trust me when i say you must get rid of that intake. it flows horrible, cracks easily, and soaks in heat like a mug.

allout06

iTrader: (11)

Ive already got it mounted and the bottom plate welded up for it. its been on the car for about 2 years now, cam only, then a procharger and never had n e trouble. I dont believe in the whole heat soak deal, especially using methanol, the air is moving so fast that, imo, has enough time to gain that much heat to affect performance. Besides, most guys are running vic jr's/aarons elbow, edelborck pro flow, holley hi rams, etc, all made of aluminum. Thanks for the heads up though. If i dont hit my HP goals of 900rwhp+ ill start looking into replacing things, if i do then it can stay.

allout06

iTrader: (11)

Im considering on dumping the wastegates. any opinions on this? Its gonna be a real pain in the *** to plumb these back in. hmmm

Reject

iTrader: (24)

you mean there was other options other than dumping the WG's?!

allout06

iTrader: (11)

hahaha right? Ive watched some videos of dumped gates. they sound mean for sure. i dont know why people think it sounds like an exhaust leak. Ive heard theres is a slight performance gain also...

Blackpanther99

iTrader: (8)

It does sounds pretty awesome.

allout06

iTrader: (11)

Well, we only managed to get one wastegate in place tonight... The damn saw blade broke while we were making our cut for the dump pipe and it just happen to be at the same time all the stores close.. so we will ahve to finish them up next weekend. i did decide to just dump to the atmosphere. Theyll be slash cut right under the sway bar.

LT1TA

iTrader: (17)

yes the dumped gates were not that bad. For the short time i had it running. With duals, I heard the exhaust as much as the gates so I don't see why people complain so much about it

LS3_CHEVELLE

Great work man, and great pics too, thanks!!!

Blackpanther99

iTrader: (8)

Looking sweet

dans94z28

iTrader: (2)

thats some really clean work and great build