nastylx

So far my list goes like this:

'99 LM7 stroked to 383
Wiseco coated forged pistons
Callies compstar H beams
Callies compstar crank
TFS 220 as cast with some tooley work
trunion upgrade
Edelbrock Pro Flo
Siemens Deka 80's
fasst fuel rails
borg warner s480 1.32ar t6
twin scroll setup
tiel bov & wastegate
microsquirt3
A1000
TH400 Rmvb
3500 stall
carbon driveshaft
8.8 narrowed 1.5" on each side with 31 spline axles and 3.08 gear withlocker and girdle

nastylx

This is all yet to be purchased just getting it out there for when the time comes, im bored.... lots of other mods will be added to the list later on as i collect an begin assembling my fox coupe

jridenour31

Needs more fuel system. Don't buy a 3500 stall, get one custom made for your application. Might as well just run an explorer trac-lock if you're only using 31 spline axles. Is this a street car? Everything else looks pretty good.

nastylx

Cant decide either to call it a trackable street car or a streetable track car, leanin towards the latter of the two, it will be 2 seater with cage but will also have street manners and 20+mpg on street tune

nastylx

Martin at tick is helpin me select the grocery list including one of his cams

BMF_Racing

iTrader: (6)

then you are in good hands, he will not steer you wrong.

nastylx

Thats what i've heard, he's a pretty cool guy that knows his **** lol

Sales@Tick

iTrader: (3)

Let's get this thing rolling out under some big power!

nastylx

Thats the plan, email me back with prices lol

nastylx

At first i was just aiming for 7-750 but now im aiming for 1k after i get use to it

nastylx

And with the compstar crank, were you meaning the dragonslayer or the other on ya'lls page?

allout06

iTrader: (11)

id ditch the A1000 and roll with a magnafuel 4303

nastylx

I'll take as much advice as possible guys

nastylx

This thing better be a monster when i get done for the amount of coin goin in lol

Sales@Tick

iTrader: (3)

I did this morning!
I think you'd be fine with a Compstar crank which is what I quoted you on, but if you want an American forging the Dragonslayer is a great piece.

nastylx

Worth the extra $$$?

nastylx

Are those wisecos dished enough for 20+psi? What hp are the internals and heads rated to support?

nastylx

Everybody on my forum is tellin me im an idiot for spending 10k on a 5.3, sayin i should just do heads cam rods pistons an boost the **** out of it like them, but their's keeps poppin when they throw real boost to it an they have to rebuild so im gonba stick with this build an show em what a fully built 5.3 can do

Sales@Tick

iTrader: (3)

Do what makes YOU happy!

nastylx

Well other then the price, this makes me happy lol but i understand ya gotta pay to play