1979 Malibu Wagon (denmah edition)
game over 6.0 and 80e
first test fit, dropped in 80e and engine, only thing in the way is a lower step, in the bac of the K mebmer, well, i have a plasma cutter so that is nothing haha
plenty of room to drop the pan right down in there now

80e and 6.0 drops right in, so ****** easy, i am in love already haha
made engine mounts that go right into the stock SBC clamshells on the k member out of spare metal
oh ****, going to be a close one!
**** yeah it fits with some intake and hood mods! Under the stock hood!
modded the stock crossmember for the trans, bolted right in!
Introduction to the malibu
http://www.youtube.com/watch?v=5wR4K...ature=youtu.be
engine and trans installed!
http://www.youtube.com/watch?v=Hq7RA...ature=youtu.be
Trending Topics
The Best V8 Stories One Small Block at Time
ls9 gaskets a friend gave me for free
apline motorsports studs, pac1218 springs
stock cam, stock everything else, going to get a GT45 68mm
a 4l80e and a stock tq converter, with the tried and true transgo HD2 kit
I actually have a stock engine harness, and a ms3, and two projects here, so not sure what one i am going to use on this yet.






Why spend $50 for a couple of fancy welded pieces of metal with holes when you can use an old seat belt and a knot?



